Drop-in fuel production with plastic waste pyrolysis oil over catalytic separation

Shuang Wang,Hana Kim,Doyeon Lee,Yu-Ri Lee,Yooseob Won,Byung Wook Hwang,Hyungseok Nam,Ho-Jung Ryu,Kyong-Hwan Lee

DOI: https://doi.org/10.1016/j.fuel.2021.121440

IF: 7.4

2021-12-01

Fuel

Abstract:The catalytic upgrading of plastic pyrolysis oil was conducted in a 2-kg-scale pyrolysis oil separation system with or without zeolite 4A, Cu-based (MDC-7) and Ni-based catalysts to produce light (F1), middle (F2) and heavy (F3) oil fractions. From the preliminary separation tests without a catalyst, the separation vapor temperature for diesel-like middle fraction (C11 - C22) was determined to be in the range of 107–305 °C. After the pyrolysis oil separation with catalysts, the heavy carbon range (>C23) sharply decreased from 22.1 wt% in the crude plastic pyrolysis oil to 0.1–1.6 wt% and 7.3–8.4 wt% in the F1 and F2, respectively. Among three catalysts, Ni-based catalyst exhibited the highest deoxygenation capacity (1.23% O in F1 and 0.3% O in F2) owing to its strong acid sites concentration (1.115 mmol/g). Accordingly, the order of the deoxygenation capacity was Ni-based > MDC-7 > zeolite 4A > no catalyst. Moreover, the catalytic reactions (deoxygenation) and coke formation mainly occurred on the strong acid sites. MDC-7 catalyst contributed to more production of C6–C10 range (15.8 %) with aromatic and naphthenic compounds. In contrast, the major catalytic mechanisms of Ni-based catalyst were dehydration, decarboxylation and decarbonylation reactions. In addition, the physical properties of catalytically upgraded pyrolysis oil were close to those of the petroleum-based fuels. Finally, the current study suggested that Ni-based catalyst was a suitable catalyst for the production of diesel-like fraction (C11-C12) with the lowest contents of oxygen from the plastic pyrolysis oil.

energy & fuels,engineering, chemical