Abstract:High-performance Cu catalysts were developed for the selective hydrogenation of γ-butyrolactone (GBL) to 1,4-butanediol (BDO). Among the various catalysts prepared by ammonia evaporation (AE) and impregnation (IM) methods with silica or MFI zeolite supports, the 5% Cu-SiO2-AE catalyst was the best one. It exhibited 95% selectivity for BDO and 71% conversion of GBL after 2–8 h reaction at 200 °C and 4 MPa H2, with high stability in five-cycle runs. Comprehensive characterizations showed that the AE method favored generating nano Cu particles with an average size of 2.9 nm on the 5% Cu-SiO2-AE catalyst. The silica support derived from a sol demonstrated an advantage over the MFI zeolite in the preparation of a highly dispersed and stable Cu catalyst, in view of its anti-sintering and robust composition of Cu0, Cu+, and Cu2+ in the cycling operation. The reaction pathways for GBL to BDO over the Cu catalysts were found to commonly involve reversible reactions of hydrogenation and dehydrogenation, along with subsequent dehydration to form THF. The high performance of the Cu catalysts in the conversion of GBL to BDO was attributed to the high dispersion of Cu, the presence of stable active sites, and fewer strong acid sites in the catalyst.

What problem does this paper attempt to address?

The paper mainly addresses the following issues: 1. **Development of Efficient Catalysts**: The research team developed a high-performance copper-based catalyst (5% Cu-SiO2-AE) for the selective hydrogenation of γ-butyrolactone (GBL) to produce 1,4-butanediol (BDO). This catalyst exhibited up to 95% selectivity and 71% conversion rate under conditions of 200°C and 4 MPa hydrogen pressure. 2. **Optimization of Catalyst Performance**: By comparing different preparation methods (ammonia evaporation method AE and impregnation method IM) and different support materials (silica SiO2 and MFI zeolite), the researchers identified the optimal catalyst combination. The results showed that the silica-supported copper catalyst prepared by the ammonia evaporation method (5% Cu-SiO2-AE) had the best performance. 3. **Exploration of Reaction Mechanism**: The study revealed that the catalytic hydrogenation reaction pathway from GBL to BDO involves reversible hydrogenation and dehydrogenation reactions, followed by dehydration to form tetrahydrofuran (THF). This finding is crucial for understanding the reaction mechanism. 4. **Evaluation of Catalyst Stability**: In five consecutive cycle experiments, the 5% Cu-SiO2-AE catalyst demonstrated excellent stability and reusability, indicating that it is a very promising industrial catalyst. 5. **Structural Characterization**: Through detailed physicochemical property characterization of the catalyst, including X-ray diffraction (XRD) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM), the researchers proved that the catalyst prepared by the ammonia evaporation method has higher metal dispersion and better thermal stability. In summary, this study successfully developed an efficient copper-based catalyst for the catalytic hydrogenation process from GBL to BDO, and conducted an in-depth investigation of its performance, reaction mechanism, and structure, providing a new solution for the sustainable production of BDO.

Catalytic Hydrogenation of γ-Butyrolactone to Butanediol over a High-Performance Cu-SiO2 Catalyst

Effects of Basic Promoters on the Catalytic Performance of Cu/SiO2 in the Hydrogenation of Dimethyl Maleate

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

Preparation of Γ-Butyrolactone from 1,4-Butanediol Dehydrogenation over Cu/ZnO/Al2O3 Catalyst

Enhanced the dehydrocyclization of 1,4-butanediol to γ-butyrolactone via the regulation of interface oxygen vacancies in Cu/MgO-CeO 2 catalyst

Silicalite‐1 encapsulated Cu‐based catalyst for selective hydrogenation of maleic anhydride to γ‐Butyrolactone

Coupling process of dehydrogenation of 1,4-butanediol and hydrogenation of dimethyl maleate over CuO/SiO2 catalysts

Influence of preparation method on Ni/SiO2 catalyst for selective hydrogenation of succinic anhydride to γ-butyrolactone

Coupling of nitrobenzene hydrogenation and 1, 4-butanediol dehydrogenation for the simultaneous synthesis of aniline and γ-butyrolactone over copper-based catalysts

The solvent-free hydrogenation of butyl levulinate to γ-valerolactone and 1,4-pentanediol over skeletal Cu-Al-Zn catalyst

Preparation of Cu/Sba-15 Catalysts by Different Methods for the Hydrogenolysis of Dimethyl Maleate to 1,4-Butanediol

Coupling Reaction of 1,4-Butanediol with Maleic Anhydride over Cr-Cu/Sio2 Catalysts

Selective Hydrogenation of Biomass-Derived 2(5H)-Furanone to Γ-Butyrolactone over Ni-Based Bimetallic Catalysts

Bimetallic Synergy Effects of Phyllosilicate-Derived NiCu@SiO2 Catalysts for 1,4-Butynediol Direct Hydrogenation to 1,4-Butanediol

Catalytic hydrogenation of maleic anhydride to γ-butyrolactone over a high-performance hierarchical Ni-Zr-MFI catalyst

Selective vapour phase dehydrogenation of biomass-derived 1,4-butanediol to gamma butyrolactone over Cu/ZrO2 catalysts: influence of La2O3 promotor

Tailoring the catalytic activity of basic mesoporous Cu/CeO2 catalyst by Al2O3 for selective lactonization and dehydrogenation of 1,4-butanediol to γ-butyrolactone

Boron Modified Bifunctional Cu/SiO2 Catalysts with Enhanced Metal Dispersion and Surface Acid Sites for Selective Hydrogenation of Dimethyl Oxalate to Ethylene Glycol and Ethanol

Liquid-phase hydrogenation of dimethyl maleate to 1,4-butanediol over a sorbitol-modified Cu@C/ZnO catalyst

Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Mesoporous Silica-Supported Cu-Ni Composite Catalysts

Deactivation of Cu/ZSM-5 Catalysts during the Conversion of 2,3-Butanediol to Butenes