Abstract:Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions. Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions.

The solvent-free hydrogenation of butyl levulinate to γ-valerolactone and 1,4-pentanediol over skeletal Cu-Al-Zn catalyst

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Highly Efficient Selective Hydrogenation of Levulinic Acid to Γ-Valerolactone over Cu–Re/TiO2 Bimetallic Catalysts

Hydrogenation of Levulinic Acid over Nickel Catalysts Supported on Aluminum Oxide to Prepare Γ-Valerolactone

Selective Production of gamma-Valerolactone and Valeric Acid in One-Pot Bifunctional Metal Catalysts

Catalytic Hydrogenation of Levulinic Acid to Gamma-Valerolactone over Ni/ZrO2

Supported Copper Catalysts for Highly Efficient Hydrogenation of Biomass-Derived Levulinic Acid and Γ-Valerolactone

Selective Production of Γ-Valerolactone or 1,4-Pentanediol from Levulinic Acid/esters over Co-based Catalyst: Importance of the Synergy of Hydrogenation Sites and Acidic Sites

Copper-based Catalysts with Tunable Acidic and Basic Sites for the Selective Conversion of Levulinic Acid/ester to Γ-Valerolactone or 1,4-Pentanediol

Continuous Hydrogenation of Ethyl Levulinate to Γ-Valerolactone and 2-Methyl Tetrahydrofuran over Alumina Doped Cu/SiO2 Catalyst: the Potential of Commercialization

Role of the Cu-ZrO2 interface in the hydrogenation of levulinic acid to γ-valerolactone

Synthesis of Γ-Valerolactone from Ethyl Levulinate Hydrogenation and Ethyl 4-Hydroxypentanoate Lactonization over Supported Cu-Ni Bimetallic, Bifunctional Catalysts

Solvent‐Free Efficient Hydrogenation of Levulinic Acid over Silicotungstic Acid Promoting the Activity of CuNiAl Catalysts: A Synergistic Effect

Hydrodeoxygenation of Levulinic Acid to γ-Valerolactone over Mesoporous Silica-Supported Cu-Ni Composite Catalysts

Catalytic Hydrogenation of Levulinic Acid for the Preparation of γ-Valerolactone by CuAgZrO2-graphene Nanocomposite

Switching production of γ-valerolactone and 1,4-pentanediol from ethyl levulinate via tailoring alkaline sites of CuMg catalyst and hydrogen solubility in reaction medium

Catalytic Hydrogenation of γ-Butyrolactone to Butanediol over a High-Performance Cu-SiO2 Catalyst

Cu/H–ZSM-5: A highly active and selective catalyst for the production of γ-valerolactone from biomass-derived levulinic acid

Isopropanol/Water Bi‐Solvent Enhanced the Catalytic Transfer Hydrogenation of Levulinic Acid to γ‐Valerolactone over Ru‐PC Catalyst

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

In Situ Construction of a Co/ZnO@C Heterojunction Catalyst for Efficient Hydrogenation of Biomass Derivative under Mild Conditions