Abstract:Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions. Multi‐metallic catalysts rely on the synergistic effect between metals to perform better catalytic effect in biomass hydrogenation experiments compared with mono‐metallic catalysts. A series of CuNiAl composite metal oxide catalysts promoted by silicotungstic acid (HSiW), which were prepared by co‐precipitation and impregnation methods, were characterized by powder X‐ray diffraction (XRD), N2‐physisorption, scanning electron microscope (SEM) and NH3 program temperature desorption (NH3‐TPD) and pyridine infrared adsorption (Py‐FTIR). Their catalytic performance was evaluated in the hydrogenation of levulinic acid (LA) to prepare γ‐valerolactone (GVL). The results showed that the addition of Cu could improve the hydrogenation activity of Ni, and the addition of HSiW could further increase the amount of acid sites in the catalysts. Both of them could enhance the conversion of LA to some extent. CuNiAl‐5SiW, the par excellence catalyst, relied on the synergistic interactions between metals as well as the Brønsted and Lewis acid active sites to show efficient hydrogenation performance. The CuNiAl‐5SiW catalyst demonstrated 96.9 % conversion of LA and more than 99 % selectivity to GVL under 2 hours of reaction time, 180 °C of reaction temperature, 3.0 MPa of initial hydrogen pressure and solvent‐free conditions.

Silicalite‐1 encapsulated Cu‐based catalyst for selective hydrogenation of maleic anhydride to γ‐Butyrolactone

Selective Liquid-Phase Hydrogenation of Maleic Anhydride to Succinic Anhydride on Biosynthesized Ru-Based Catalysts

Highly efficient Ni-Mn/SiO<sub>2</sub> catalyst for the selective hydrogenation of biomass-derived levulinic acid to -valerolactone under mild conditions

Catalytic Hydrogenation of γ-Butyrolactone to Butanediol over a High-Performance Cu-SiO2 Catalyst

Catalytic hydrogenation of maleic anhydride to γ-butyrolactone over a high-performance hierarchical Ni-Zr-MFI catalyst

Effects of Basic Promoters on the Catalytic Performance of Cu/SiO2 in the Hydrogenation of Dimethyl Maleate

Selective Hydrogenation of Dimethyl Maleate to Tetrahydrofuran over Cu/SiO2 Catalyst: Effect of Cu+ on the Catalytic Performance

Modified Cu/ZnO/Al2O3 Catalysts for γ-Butyrolactone Synthesis

PtPdCoNiCu/TiO2 High-Entropy alloy catalyst for synthesis of γ-Butyrolactone by selective hydrogenation of maleic anhydride

Influence of preparation method on Ni/SiO2 catalyst for selective hydrogenation of succinic anhydride to γ-butyrolactone

Core‐Shell Zeolite with Confined Nickel Particles as Prominent Catalyst for the Hydrogenation of Maleic Anhydride

Effect of Different Ligands on the Preparation of Pt-xMn@HZSM-5 and Their Catalytic Performance for Iso-Butane Catalytic Cracking

Low-temperature Hydrogenation of Maleic Anhydride to Succinic Anhydride and Γ-Butyrolactone over Pseudo-Boehmite Derived Alumina Supported Metal (metal=cu, Co and Ni) Catalysts

Preparation of Highly Dispersed Cu Catalysts from Hydrotalcite Precursor for the Dehydrogenation of 1,4-Butanediol

The solvent-free hydrogenation of butyl levulinate to γ-valerolactone and 1,4-pentanediol over skeletal Cu-Al-Zn catalyst

One-pot synthesis of 1,4-butanediol via the deep hydrogenation of maleic anhydride over Cu-xMo/SiO2 catalysts

Silicalite-1 zeolite acidification by zinc modification and its catalytic properties for isobutane conversion

Solvent‐Free Efficient Hydrogenation of Levulinic Acid over Silicotungstic Acid Promoting the Activity of CuNiAl Catalysts: A Synergistic Effect

MFI zeolite with confined adjustable synergistic Cu sites for the hydrogenation of levulinic acid

SSZ-39 zeolite-based Ru catalysts for selective hydrogenation of levulinic acid to γ-valerolactone: Influence of synthesis method and zeolite acidity

A Comparison of Structure–Activity of Cu-Modified over Different Mesoporous Silica Supports for Catalytic Conversion of Levulinic Acid