activated PVDF solid electrolyte for advanced lithium – oxygen batteries

Al,Hailiang Mu,Dan Ma,Hao Zhang,Kun Luo,Caizheng Ou,X. Zhuge,Changzhou,Bin Xu,Ben,Xiaoteng Liu,Yurong Ren,Maryam Bayati,Xiaoqin Zou

Abstract:Lithium-ion

Chemistry,Engineering,Materials Science

What problem does this paper attempt to address?

Li1.3Al0.3Ti1.7P3O12 activated PVDF solid electrolyte for advanced lithium–oxygen batteries

Caizheng Ou,Hao Zhang,Dan Ma,Hailiang Mu,Xiangqun Zhuge,Yurong Ren,Maryam Bayati,Ben Bin Xu,Xiaoteng Liu,Xiaoqin Zou,Kun Luo

DOI: https://doi.org/10.1002/eom2.12481

2024-08-02

EcoMat

Abstract:The figure highlights the lithium‐ion conducting membrane (LCM) in lithium–oxygen batteries. Redox mediators (RMs) are added to the cathode as a catalyst for decomposing lithium peroxide (Li2O2). The LCM membrane exhibits high ionic conductivity, blocking RMs shuttling and preventing dendrite growth. Lithium‐ion composite solid electrolyte membranes embedded with Li1.3Al0.3Ti1.7P3O12 and poly(vinylidene fluoride) are prepared using a facile casting method. Furthermore, we added LiI as an active agent for decomposing the anode product. The synergy resulted in a high conductivity of 7.4 mS·cm−1 and lithium‐ion mobility of 0.59 and a reduction of the overpotential to 0.86 V for lithium–oxygen batteries (LOBs). The membrane has enhanced Young's modulus of 6.6 GPa that effectively blocked the lithium dendrite growth during the battery operation and puncturing to the membrane led to a significant LOB cycle life of 542 cycles. Meanwhile, Li|Li symmetrical battery overpotential maintained at 42 mV after 470 h of operation.
Modification of Solid Electrolyte Interface Layer Between PVDF-based Electrolyte and Lithium Anode

Ying Liang,Jie Zhang,Shundong Guan,Kaihua Wen,Chuangjie Guo,Yu-Hsien Wu,Haocheng Yuan,Sijie Liu,Ying Qi,Wenbin Mo,Xue Zhang,Ce-Wen Nan

DOI: https://doi.org/10.1016/j.jmat.2023.12.003

IF: 8.589

2024-01-01

Journal of Materiomics

Abstract:Poly(vinylidene fluoride) (PVDF)-based polymer electrolytes (PEs) with good electrochemical performance and processability as well as low-cost advantage, have great potential applications in solid-state lithium (Li) metal batteries (SSLMBs). PVDF-based PEs are generally produced by employing a solutioncasting approach with N,N-dimethylformamide (DMF) as the solvent, accompanied by the formation of [DMF-Li+] complex, which facilitates the Li-ion transport. However, the residual DMF can react continuously with lithium (Li) metal, thereby deteriorating the interface layer in the middle of the PVDF-based PEs and Li anodes. Herein, we introduce propylene carbonate (PC) into the PVDF-based PEs to regulate the solvation structure and stabilize the interface layer between the PEs and Li anodes. PC accelerates the dissociation of lithium oxalyldifluoroborate (LiODFB). Consequently, "lithium propylene dicarbonate (LPDC)-B-O00 oligomer forms as the interfacial layer with high tenacity, homogeneity, and densification, which improves the interfacial contact and suppresses the continuous reaction between the residual DMF and Li anode. We further demonstrate that the PVDF-based PE prepared with DMF-PC mix-solvents shows improved room-temperature ionic conductivity (1.18 x 10-3 S/cm), enhanced stability against electrodes, and superior cycling performance in LiCoO2-based SSLMBs (maintaining 84 % of the initial discharge capacity after 300 cycles). (c) 2024 The Authors. Published by Elsevier B.V. on behalf of The Chinese Ceramic Society. This is an open access article under the CC BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/).
Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Jiangnan Li,Wenjing Zheng,Lin Zhu,Hao Zhou,Kan Zhang

DOI: https://doi.org/10.1016/j.jallcom.2023.170640

IF: 6.2

2023-05-21

Journal of Alloys and Compounds

Abstract:Polymer electrolytes possess good flexibility and processability, and have wide application prospects in the field of battery. However, polymer electrolytes have the disadvantages of low ionic conductivity, narrow electrochemical window and poor mechanical properties. Herein, we designed a PVDF-HFP based composite electrolyte filled with lithium magnesium silicate. The addition of lithium magnesium silicate can disrupt the ordered arrangement of polymer chain segments, promote the dissociation of lithium salts, increase the content of [NMP-Li + ], reduce the gap on the surface of PVDF-HFP electrolyte membrane, inhibit the migration of anions and improve the electrochemical stability of the electrolyte membrane. To improve the mechanical properties of the electrolyte membrane, polyethylene membrane with excellent mechanical property was added into the electrolyte membrane. The modified PVDF-HFP based polymer composite electrolyte membrane has high ionic conductivity (2.56 × 10 -4 S·cm -1 ) under room temperature and high lithium ion migration number (0.41). Due to its good lithium ion transmission ability, the oxidation potential (4.8 V) and the ability to restrain lithium dendrite growth of the modified PVDF-HFP based composite electrolyte have been effectively boosted. The whole battery assembled with this electrolyte membrane and NCM622 can stably cycle for 50 cycles at 0.5 C (capacity retention rate is 89.6%).

materials science, multidisciplinary,chemistry, physical,metallurgy & metallurgical engineering
Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

Dechao Zhang,Long Zhang,Kun Yang,Hongqiang Wang,Chuang Yu,Di Xu,Bo Xu,Li-Min Wang

DOI: https://doi.org/10.1021/acsami.7b12186

2017-10-16

Abstract:Exploration of advanced solid electrolytes with good interfacial stability toward electrodes is a highly relevant research topic for all-solid-state batteries. Here, we report PCL/SN blends integrating with PAN-skeleton as solid polymer electrolyte prepared by a facile method. This polymer electrolyte with hierarchical architectures exhibits high ionic conductivity, large electrochemical windows, high degree flexibility, good flame-retardance ability, and thermal stability (workable at 80 °C). Additionally, it demonstrates superior compatibility and electrochemical stability toward metallic Li as well as LiFePO4 cathode. The electrolyte/electrode interfaces are very stable even subjected to 4.5 V at charging state for long time. The LiFePO4/Li all-solid-state cells based on this electrolyte deliver high capacity, outstanding cycling stability, and superior rate capability better than those based on liquid electrolyte. This solid polymer electrolyte is eligible for next generation high energy density all-solid-state batteries.

materials science, multidisciplinary,nanoscience & nanotechnology
Al and Ta co-doped LLZO as active filler with enhanced Li+ conductivity for PVDF-HFP composite solid-state electrolyte

Jianxun Zou,Xinlong Gao,Xiangyang Zhou,Juan Yang,Jingjing Tang,Huaishuo Kou,Ruirui Chang,Yaguang Zhang

DOI: https://doi.org/10.1088/1361-6528/acb3cb

IF: 3.5

2023-01-19

Nanotechnology

Abstract:Battery safety calls for solid state batteries and how to prepare solid electrolytes with excellent performance are of significant importance. In this study, hybrid solid electrolytes combined with organic PVDF-HFP and inorganic active fillers are studied. The modified active fillers of Li7-x-3yAlyLa3Zr2-xTaxO12 are obtained by co-element doping with Al and Ta when LLZO is synthesized by calcination. And an high room temperature ionic conductivity of 5.357×10-4 S/cm is exhibited by ATLLZO ceramic sheet. The composite solid electrolyte PVDF-HFP/LiTFSI/ATLLZO (PHL-ATLLZO) is prepared by solution casting method, and its electrochemical properties are investigated. The results show that when the contents of lithium salt LiTFSI and active filler ATLLZO are controlled at 40 wt% and 10%, respectively, the ionic conductivity of the resulting composite solid electrolyte is as high as 2.686×10-4 S/cm at room temperature, and a wide electrochemical window of 4.75 V is exhibited. The LiFePO4/PHL-ATLLZO/Li all-solid-state battery assembled based on the composite solid-state electrolyte exhibits excellent cycling stability at room temperature. The cell assembled by casting the composite solid-state electrolyte on the cathode surface shows a discharge specific capacity of 134.3 mAh/g and 96.2% capacity retention after 100 cycles at 0.2C. The prepared composite solid-state electrolyte demonstrates excellent electrochemical performance.

materials science, multidisciplinary,physics, applied,nanoscience & nanotechnology
Advanced High-Voltage Electrolyte Design Using Poly(ethylene Oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium-Metal Batteries

Mingjie Zhang,Urbi Pal,Faezeh Makhlooghiazad,Luke A O'Dell,Shinji Kondou,Giuseppe A Elia,Claudio Gerbaldi,Maria Forsyth

DOI: https://doi.org/10.1021/acsami.4c11114

IF: 9.5

2024-10-07

ACS Applied Materials & Interfaces

Abstract:Poly(ethylene oxide) (PEO)-based solid polymer electrolytes (SPEs) are among the most promising materials for solid-state lithium metal batteries (LMBs) due to their inherent safety advantages; however, they suffer from insufficient room-temperature ionic conductivity (up to 10^(-6) S cm^(-1)) and limited oxidation stability (<4 V). In this study, a novel "polymer-in-high-concentrated ionic liquid (IL)" (PiHCIL) electrolyte composed of PEO, N-propyl-N-methylpyrrolidinium bis(fluorosulfonyl)...

materials science, multidisciplinary,nanoscience & nanotechnology
Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Yue Zhang,Jun-Hong Li,Man Ge,Yun-Hui Huang,Heng-Hui Xu

DOI: https://doi.org/10.1007/s12598-024-02858-8

IF: 6.318

2024-07-03

Rare Metals

Abstract:Solid-state batteries with solid polymer electrolytes are considered the most promising due to their high energy density and safety advantages. However, their development is hindered by the limitations of polymer electrolytes, such as low ionic conductivity, poor mechanical strength and inadequate fire resistance. This study presents a thin polyvinylidene fluoride-based composite solid electrolyte film (25 μm) incorporating two-dimensional modified lipophilic lithium magnesium silicate (LLS) as additives with good dispersibility. The incorporation of LLS promotes grain refinement in polyvinylidene fluoride (PVDF), enhances the densification of electrolyte films, increases the tensile strength to 10.42 MPa and the elongation to 251.58%, improves ion transport interface, and facilitates uniform deposition of lithium ions. Furthermore, LLS demonstrates strong adsorption ability, promoting the formation of solvated molecules, resulting in high ionic conductivity (2.07 × 10 −4 S·cm −1 at 30 °C) and a stable lithium/electrolyte interface. Symmetric Li//Li cells assembled with the thin composite electrolytes exhibit stable cycling for 2000 h at 0.1 mA·cm −2 and 0.05 mAh·cm −2 . Additionally, the LiFePO 4 //Li battery shows a capacity retention rate of 99.9% after 200 cycles at 0.5C and room temperature.

materials science, multidisciplinary,metallurgy & metallurgical engineering
Preparation and performance study of a PVDF–LATP ceramic composite polymer electrolyte membrane for solid-state batteries

Xinghua Liang,Di Han,Yunting Wang,Lingxiao Lan,Jie Mao

DOI: https://doi.org/10.1039/c8ra08436j

IF: 4.036

2018-01-01

RSC Advances

Abstract:Recently, safety issues in conventional organic liquid electrolytes and the interface resistance between the electrode and electrolyte have been the most challenging barriers for the expansion of lithium batteries to a wide range of applications.

chemistry, multidisciplinary
Expanding the active charge carriers of polymer electrolytes in lithium-based batteries using an anion-hosting cathode

Zongjie Sun,Kai Xi,Jing Chen,Amor Abdelkader,Meng-Yang Li,Yuanyuan Qin,Yue Lin,Qiu Jiang,Ya-Qiong Su,R. Vasant Kumar,Shujiang Ding

DOI: https://doi.org/10.1038/s41467-022-30788-5

IF: 16.6

2022-06-09

Nature Communications

Abstract:Abstract Ionic-conductive polymers are appealing electrolyte materials for solid-state lithium-based batteries. However, these polymers are detrimentally affected by the electrochemically-inactive anion migration that limits the ionic conductivity and accelerates cell failure. To circumvent this issue, we propose the use of polyvinyl ferrocene (PVF) as positive electrode active material. The PVF acts as an anion-acceptor during redox processes, thus simultaneously setting anions and lithium ions as effective charge carriers. We report the testing of various Li||PVF lab-scale cells using polyethylene oxide (PEO) matrix and Li-containing salts with different anions. Interestingly, the cells using the PEO-lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) solid electrolyte deliver an initial capacity of 108 mAh g −1 at 100 μA cm −2 and 60 °C, and a discharge capacity retention of 70% (i.e., 70 mAh g −1 ) after 2800 cycles at 300 μA cm −2 and 60 °C. The Li|PEO-LiTFSI|PVF cells tested at 50 μA cm −2 and 30 °C can also deliver an initial discharge capacity of around 98 mAh g −1 with an electrolyte ionic conductivity in the order of 10 −5 S cm −1 .

multidisciplinary sciences
A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

Qi Zhou,Xiaoyan Yang,Xiaosong Xiong,Qianyu Zhang,Bohao Peng,Yuhui Chen,Zhaogen Wang,Lijun Fu,Yuping Wu

DOI: https://doi.org/10.1002/aenm.202201991

IF: 27.8

2022-01-01

Advanced Energy Materials

Abstract:In parallel with researches unveiling the nature and mechanism in solid state battery, numbers of investigations have been pursuing methods to stabilize their performance as well as to reduce the cost. Simple preparation and earth-abundant ingredients are preconditions for a solid state electrolyte to be suitable for scalable production. In this work, a commercial anode active material, spinel Li4Ti5O12, is introduced for the first time, which has high ionic conductivity to sustain high rate charge/discharge with considerable high performance/cost ratio, into poly(vinylidene fluoride) to achieve a composite solid electrolyte. The membrane solid electrolyte containing 80 wt% of the Li4Ti5O12 (LTO-8) shows outstanding ionic conductivity of 2.87 x 10(-4) S cm(-1) at 35 degrees C and inhibits electronic conductive network. The self-sacrificed interface contributes to the stabilized performance of the composite. Li||LiFePO4 cells with LTO-8 present a discharge specific capacity of 150 mAh g(-1) at 0.5C and a considerable average specific capacity of 119 mAh g(-1) under 5C in 400 cycles, demonstrating its excellent working performance. This investigation provides promising application of Li4Ti5O12 for solid state electrolytes, which is superior to the reported solid state electrolytes in comprehensive performance, and surely paves another commercial way to solid state batteries.
Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

Kang Xu,Chao Xu,Yujie Jiang,Jinhai Cai,Jiaxi Ni,Chunyan Lai

DOI: https://doi.org/10.1007/s11581-022-04599-z

IF: 2.961

2022-05-14

Ionics

Abstract:It is crucial to develop solid electrolyte with good mechanical and electrochemical stability for the application of lithium metal battery. In this work, a sandwich-structured composite solid electrolyte is designed and prepared based on the blend of polyvinylidene fluoride-hexafluoropropylene/polyacrylonitrile (PVDF-HFP/PAN) polymer, Li 6.46 La 3 Zr 1.46 Ta 0.54 O 12 as filler, and a layer of PE film is introduced in the middle to act as a skeleton. The sandwich-structured PVDF-HFP/PAN-10%LLZTO-PE composite solid electrolyte displays a tensile strength of 66.58 MPa, high ionic conductivity of 2.28 × 10 -4 S/m at 25 °C, wide electrochemical stable window of 4.8 V, and high lithium ion transfer number of 0.44. The LiFePO 4 | PVDF-HFP/PAN-10%LLZTO-PE | Li coin battery shows a high specific capacity of 161.9 mAh/g and retains 150.2 mAh/g after 300 cycles at 1 C. Furthermore, the LiFePO 4 | PVDF-HFP/PAN-10%LLZTO-PE | Li pouch battery shows excellent safety and functionality.

chemistry, physical,physics, condensed matter,electrochemistry
In-Situ-Polymerized 1,3-Dioxolane Solid-State Electrolyte with Space-Confined Plasticizers for High-Voltage and Robust Li/LiCoO 2 Batteries

Yuzhou Bai,Wenqin Ma,Wujie Dong,Yingkang Wu,Xue Wang,Fuqiang Huang

DOI: https://doi.org/10.1021/acsami.3c04234

IF: 9.5

2023-05-25

ACS Applied Materials & Interfaces

Abstract:In-situ-polymerized solid-state electrolytes can significantly improve the interfacial compatibility of Li metal batteries. Typically, in-situ-polymerized 1,3-dioxolane electrolyte (PDOL) exhibits good compatibility with Li metal. However, it still suffers from the narrow electrochemical window (4.1 V), limiting the application of high-voltage cathodes. Herein, a novel modified PDOL (PDOL-F/S) electrolyte with an expanded electrochemical window of 4.43 V and a considerable ionic conductivity of...

materials science, multidisciplinary,nanoscience & nanotechnology
PVDF/Palygorskite Nanowire Composite Electrolyte for 4 V Rechargeable Lithium Batteries with High Energy Density.

Pengcheng Yao,Bin Zhu,Haowei Zhai,Xiangbiao Liao,Yuxiang Zhu,Weiheng Xu,Qian Cheng,Charles Jayyosi,Zheng Li,Jia Zhu,Kristin M. Myers,Xi Chen,Yuan Yang

DOI: https://doi.org/10.1021/acs.nanolett.8b01421

IF: 10.8

2018-01-01

Nano Letters

Abstract:Solid electrolytes are crucial for the development of solid state batteries. Among different types of solid electrolytes, poly(ethylene oxide) (PEO)-based polymer electrolytes have attracted extensive attention owing to their excellent flexibility and easiness for processing. However, their relatively low ionic conductivities and electrochemical instability above 4 V limit their applications in batteries with high energy density. Herein, we prepared poly(vinylidene fluoride) (PVDF) polymer electrolytes with an organic plasticizer, which possesses compatibility with 4 V cathode and high ionic conductivity (1.2 x 10(-4) S/cm) at room temperature. We also revealed the importance of plasticizer content to the ionic conductivity. To address weak mechanical strength of the PVDF electrolyte with plasticizer, we introduced palygorskite ((Mg,Al)(2)Si4O10(OH)) nanowires as a new ceramic filler to form composite solid electrolytes (CPE), which greatly enhances both stiffness and toughness of PVDF-based polymer electrolyte. With 5 wt % of palygorskite nanowires, not only does the elastic modulus of PVDF CPE increase from 9.0 to 96 MPa but also its yield stress is enhanced by 200%. Moreover, numerical modeling uncovers that the strong nanowire-polymer interaction and cross-linking network of nanowires are responsible for such significant enhancement in mechanically robustness. The addition of 5% palygorskite nanowires also enhances transference number of Li+ from 0.21 to 0.54 due to interaction between palygorskite and Clo(4)(-) ions. We further demonstrate full cells based on Li(Ni1/3Mn1/3Co1/3)O-2 (NMC111) cathode, PVDF/palygorskite CPE, and lithium anode, which can be cycled over 200 times at 0.3 C, with 97% capacity retention. Moreover, the PVDF matrix is much less flammable than PEO electrolytes. Our work illustrates that the PVDF/palygorskite CPE is a promising electrolyte for solid state batteries.
An Ion‐Dipole‐Reinforced Polyether Electrolyte with Ion‐Solvation Cages Enabling High–Voltage‐Tolerant and Ion‐Conductive Solid‐State Lithium Metal Batteries (Adv. Funct. Mater. 5/2022)

Kun Zhang,Feng Wu,Xinran Wang,Lumin Zheng,Xiaoyu Yang,Huichun Zhao,Yuheng Sun,Wenbin Zhao,Ying Bai,Chuan Wu

DOI: https://doi.org/10.1002/adfm.202270031

IF: 19

2022-01-01

Advanced Functional Materials

Abstract:High‐Performance Polymer Electrolytes In article number 2107764, Xinran Wang, Ying Bai, Chuan Wu, and co‐workers develop a hyperbranched polyether electrolyte for solid‐state Li metal batteries. The existing ion‐solvation structures allow for fast Li+ migration (1.26 × 10−4 S cm−1, 25 °C), a wide stable voltage window (up to 4.6 V), and Li dendrite suppression, overcoming the insufficiencies encountered by polymer electrolytes. The ion‐dipole‐reinforced solid electrolyte yields sustainable Li stripping/platting and interfacial stability, thus enabling high cycle stability and capacity retention in NCM811|Li solid‐state cells.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,nanoscience & nanotechnology
A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

Jun Li,Kongjun Zhu,Zhongran Yao,Guoming Qian,Jie Zhang,Kang Yan,Jing Wang

DOI: https://doi.org/10.1007/s11581-019-03320-x

IF: 2.961

2019-11-10

Ionics

Abstract:Solid electrolytes should be sought to exhibit high conductivity, good thermostability, and excellent mechanical properties for realizing excellent performance of lithium-ion batteries. In this study, we optimize the composition of poly(ethylene oxide)/poly(vinylidene fluoride) (PEO/PVDF) matrix and introduce Li6.2Ga0.1La3Zr1.5Bi0.5O12 (LLZO) ceramic powders into the matrix to form novel composite solid electrolytes. The PEO/PVDF blend matrix shows a low melting point and crystallinity and a high thermostability when the weight ratio of PEO and PVDF is 7:3. The electrolyte consisting of this PEO/PVDF blend matrix and 10 wt% LLZO shows the maximum conductivity (4.2 × 10−5 S cm−1 at 30 °C). In addition, all-solid-state LiFePO4||Li battery assembled with this solid electrolyte shows good cycling stability, which retained 96.5% of the maximum capacity after 100 cycles, and columbic efficiency (close to 100%) at 60 °C. The Li||Li symmetric battery assembled with the solid electrolyte can be steadily cycled for more than 300 h at a current density of 0.2 mA cm−2 at 60 °C. Hence, the new as-synthesized solid electrolyte should be a promising electrolyte for high performance of all-solid-state batteries.

chemistry, physical,physics, condensed matter,electrochemistry
A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

Qi Zhou,Xiaoyan Yang,Xiaosong Xiong,Qianyu Zhang,Bohao Peng,Yuhui Chen,Zhaogen Wang,Lijun Fu,Yuping Wu

DOI: https://doi.org/10.1002/aenm.202201991

IF: 27.8

2022-08-30

Advanced Energy Materials

Abstract:Li4Ti5O12, a commercial anode material, is used for solid state electrolyte for the first time via forming a composite with poly(vinylidene fluoride). Endowed by its ion transport ability and electrochemical activity, an electronic/ionic mixed conductive phase spontaneously forms at electrolyte‐lithium anode interface, which contributes to stable performance in solid lithium metal battery. In parallel with researches unveiling the nature and mechanism in solid state battery, numbers of investigations have been pursuing methods to stabilize their performance as well as to reduce the cost. Simple preparation and earth‐abundant ingredients are preconditions for a solid state electrolyte to be suitable for scalable production. In this work, a commercial anode active material, spinel Li4Ti5O12, is introduced for the first time, which has high ionic conductivity to sustain high rate charge/discharge with considerable high performance/cost ratio, into poly(vinylidene fluoride) to achieve a composite solid electrolyte. The membrane solid electrolyte containing 80 wt% of the Li4Ti5O12 (LTO‐8) shows outstanding ionic conductivity of 2.87 × 10−4 S cm−1 at 35 °C and inhibits electronic conductive network. The self‐sacrificed interface contributes to the stabilized performance of the composite. Li||LiFePO4 cells with LTO‐8 present a discharge specific capacity of 150 mAh g−1 at 0.5C and a considerable average specific capacity of 119 mAh g−1 under 5C in 400 cycles, demonstrating its excellent working performance. This investigation provides promising application of Li4Ti5O12 for solid state electrolytes, which is superior to the reported solid state electrolytes in comprehensive performance, and surely paves another commercial way to solid state batteries.

materials science, multidisciplinary,chemistry, physical,physics, applied, condensed matter,energy & fuels
Solvent-Free Process for Blended PVDF-HFP/PEO and LLZTO Composite Solid Electrolytes with Enhanced Mechanical and Electrochemical Properties for Lithium Metal Batteries

Rong-Ao Tong,Linhui Chen,Bingbing Fan,Gang Shao,Ruiping Liu,Chang-An Wang

DOI: https://doi.org/10.1021/acsaem.1c02566

IF: 6.4

2021-10-13

ACS Applied Energy Materials

Abstract:All solid-state lithium metal batteries are viewed as a potential next-generation energy storage technology due to their high energy density and better safety performance. The study on solid-state electrolytes (SSE) is of crucial importance for the development of technology in this field. Here, we develop a solvent-free preparation and matrix modification process for all-solid-state composite electrolytes (CSEs) based on the blended PVDF-HFP/PEO polymer matrix, and systematically study the effects of the solvent-free process on their properties. The results show that the solvent-free PVDF-HFP/PEO/10 wt % LLZTO solid-state electrolytes (1:1 mass ratio blended polymer matrix) combine the electrochemical and mechanical advantages of both polymers, thus-prepared electrolytes perform excellent tensile strength and ductility (over 500% strain for polymer matrix as well as 170% strain and 4.78 MPa strength for CSEs), and the ionic conductivity can reach ∼6.2 × 10–4 S·cm–1 at 80 °C. At the same time, the electrochemical stability and cycle stability of the electrolytes are enhanced due to the optimized process. The discoloration reaction of PVDF-HFP in composite electrolytes is further studied in this work as well. In addition to excellent performance, the simple process based on the solvent-free method also lays the foundation for scale-up production.The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.1c02566.EDS, FT-IR spectra, DSC curves, σ – (1/T) plots, LSV curves, Nyquist plots, photographs, and specific capacity–cycle performance (PDF)This article has not yet been cited by other publications.

materials science, multidisciplinary,chemistry, physical,energy & fuels
An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

Chunxiang Xian,Shengzhao Zhang,Ping Liu,Lei Huang,Xinping He,Shenghui Shen,Feng Cao,Xinqi Liang,Chen Wang,Wangjun Wan,Yongqi Zhang,Xin Liu,Yu Zhong,Yang Xia,Minghua Chen,Wenkui Zhang,Xinhui Xia,Jiangping Tu

DOI: https://doi.org/10.1002/smll.202306381

IF: 13.3

2024-01-01

Small

Abstract:All-solid-state lithium metal batteries (LMBs) are regarded as one of the most viable energy storage devices and their comprehensive properties are mainly controlled by solid electrolytes and interface compatibility. This work proposes an advanced poly(vinylidene fluoride-hexafluoropropylene) based gel polymer electrolyte (AP-GPEs) via functional superposition strategy, which involves incorporating butyl acrylate and polyethylene glycol diacrylate as elastic optimization framework, triethyl phosphate and fluoroethylene carbonate as flameproof liquid plasticizers, and Li-7 La-3 Zr-2 O-12 nanowires (LLZO-w) as ion-conductive fillers, endowing the designed AP-GPEs/LLZO-w membrane with high mechanical strength, excellent flexibility, low flammability, low activation energy (0.137 eV), and improved ionic conductivity (0.42 x 10(-3) S cm(-1) at 20 degrees C) due to continuous ionic transport pathways. Additionally, the AP-GPEs/LLZO-w membrane shows good safety and chemical/electrochemical compatibility with the lithium anode, owing to the synergistic effect of LLZO-w filler, flexible frameworks, and flame retardants. Consequently, the LiFePO4 /Li batteries assembled with AP-GPEs/LLZO-w electrolyte exhibit enhanced cycling performance (87.3% capacity retention after 600 cycles at 1 C) and notable high-rate capacity (93.3 mAh g(-1) at 5 C). This work proposes a novel functional superposition strategy for the synthesis of high-performance comprehensive GPEs for LMBs.
A Superior Composite Gel Polymer Electrolyte of Li7La3Zr2O12- Poly(vinylidene Fluoride-Hexafluoropropylene) (PVDF-HFP) for Rechargeable Solid-State Lithium Ion Batteries

Y. F. Liang,S. J. Deng,Y. Xia,X. L. Wang,X. H. Xia,J. B. Wu,C. D. Gu,J. P. Tu

DOI: https://doi.org/10.1016/j.materresbull.2018.02.051

IF: 5.6

2018-01-01

Materials Research Bulletin

Abstract:High-quality solid electrolyte is essential for the growing need of lithium ion batteries. Herein, we report a novel organic-Inorganic composite electrolyte based on Li7La3Zr2O12 ceramic powder incorporated into PVDF-HFP through a simple combined method. At room temperature, the composite polymer electrolyte (CPE) possesses a good ionic transmission improvement of 3.71 x 10(-4) S cm(-1). The CPE behaves a fine lithium ion transference number of 0.58 and an electrochemical window of up to 4.65 V. CPEs display meliorative electrochemical stability compared to pure PVDF-HFP electrolyte. The cathode presents an excellent initial discharge capacity of 163.1 mAh g(-1) at 0.2 C in Li/CPE/LiFePO4 cell. The cell with CPE displays much better capacity retention than that with pure PVDF-HFP electrolyte. The Li7La3Zr2O12 modified PVDF-HFP is a promising electrolyte for lithium ion batteries.
Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Huirong Liu,Jianling Li,Wei Feng,Guimei Han

DOI: https://doi.org/10.1007/s11581-021-04094-x

IF: 2.961

2021-06-13

Ionics

Abstract:Commercial lithium-ion batteries have safety risks due to the use of electrolyte-containing flammable organic solvents. The development of all solid-state lithium ion batteries with solid electrolyte is a feasible technical way to improve the safety of batteries. In this work, PVDF-based composite solid-state electrolytes (CSEs) were prepared by coupling Li6.4La3Zr1.4Ta0.6O12 (LLZTO) and polyvinylidene fluoride (PVDF). The electrochemical performance and interfacial compatibility between composite electrolyte and electrode were improved by the combination of appropriate amount of Li-ion-conducting particles and the insulating polymer. The corresponding solid-state battery of LiFePO4 |PVDF-LLZTO-CSE| Li is fabricated and delivers initial discharge capacity of 162.4 mAh g-1, and coulomb efficiency is approximately 98.5%. And the solid-state battery exhibits satisfactory rate capability and cycling stability at room temperature. This study suggests that a combination of the lithium garnet particles and insulating polymer is one of the promising methods to solve the problem of liquid electrolyte.

chemistry, physical,physics, condensed matter,electrochemistry

activated PVDF solid electrolyte for advanced lithium – oxygen batteries

Li1.3Al0.3Ti1.7P3O12 activated PVDF solid electrolyte for advanced lithium–oxygen batteries

Modification of Solid Electrolyte Interface Layer Between PVDF-based Electrolyte and Lithium Anode

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Superior Blends Solid Polymer Electrolyte with Integrated Hierarchical Architectures for All-Solid-State Lithium-Ion Batteries

Al and Ta co-doped LLZO as active filler with enhanced Li+ conductivity for PVDF-HFP composite solid-state electrolyte

Advanced High-Voltage Electrolyte Design Using Poly(ethylene Oxide) and High-Concentration Ionic Liquids for All-Solid-State Lithium-Metal Batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Preparation and performance study of a PVDF–LATP ceramic composite polymer electrolyte membrane for solid-state batteries

Expanding the active charge carriers of polymer electrolytes in lithium-based batteries using an anion-hosting cathode

A Solid Electrolyte Based on Electrochemical Active Li<sub>4</sub>Ti<sub>5</sub>O<sub>12</sub> with PVDF for Solid State Lithium Metal Battery

Sandwich structured PVDF-HFP-based composite solid electrolytes for solid-state lithium metal batteries

In-Situ-Polymerized 1,3-Dioxolane Solid-State Electrolyte with Space-Confined Plasticizers for High-Voltage and Robust Li/LiCoO 2 Batteries

PVDF/Palygorskite Nanowire Composite Electrolyte for 4 V Rechargeable Lithium Batteries with High Energy Density.

An Ion‐Dipole‐Reinforced Polyether Electrolyte with Ion‐Solvation Cages Enabling High–Voltage‐Tolerant and Ion‐Conductive Solid‐State Lithium Metal Batteries (Adv. Funct. Mater. 5/2022)

A promising composite solid electrolyte incorporating LLZO into PEO/PVDF matrix for all-solid-state lithium-ion batteries

A Solid Electrolyte Based on Electrochemical Active Li4Ti5O12 with PVDF for Solid State Lithium Metal Battery

Solvent-Free Process for Blended PVDF-HFP/PEO and LLZTO Composite Solid Electrolytes with Enhanced Mechanical and Electrochemical Properties for Lithium Metal Batteries

An Advanced Gel Polymer Electrolyte for Solid-State Lithium Metal Batteries

A Superior Composite Gel Polymer Electrolyte of Li7La3Zr2O12- Poly(vinylidene Fluoride-Hexafluoropropylene) (PVDF-HFP) for Rechargeable Solid-State Lithium Ion Batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery