Abstract:Lithium-ion batteries are widely used today in powering devices from portable electronics to electric vehicles. Despite their great success, this battery chemistry relies on organic solvent-based liquid electrolytes which are highly flammable, leading to major safety concerns. In contrast, solid-state batteries, which are based on solid-state electrolytes, are regarded to have much better safety characteristics and potentially higher energy density than the conventional lithium-ion batteries. Solid-state electrolytes usually include ceramics, polymers, gels, and composites. Among them, polymer materials have attracted considerable attention due to their great interfacial contact, flexibility, and easy fabrication. In particular, polyvinylidene fluoride (PVDF) polymer electrolyte is a promising candidate as it can potentially provide a high voltage window and enable high energy density solid-state batteries. However, the current PVDF-based polymer electrolyte is still not compatible with high voltage cathodes, such as layered lithium transition metal oxides and the interaction between the salt and PVDF polymer has not been fully elucidated. We have systematically studied the PVDF-based electrolytes with different salts and salt combinations, including lithium bis(fluorosulfonyl)imide (LiFSI), lithium bis(trifluoromethanesulfonyl)imide (LiTFSI), and lithium bis(pentafluoroethanesulfonyl)imide (LiBETI). The optimized electrolyte delivers excellent performance for solid-state Li||LiFePO 4 cells, achieving a specific capacity of over 150 mAh/g and lasting more than 50 cycles with over 99% capacity retention. Similar tests have also been applied to lithium nickel manganese cobalt oxides (NMC), and the preliminary results show promising cycling stability and capacity retention. In addition to electrochemical study, we employed a range of synchrotron-based X-ray techniques, including diffraction, pair distribution function analysis, and absorption spectroscopy, to investigate the interactions between the polymer and lithium salt in the polymer electrolytes. This knowledge will provide valuable information for designing new polymer electrolyte systems. Acknowledgments: The work at Brookhaven National Laboratory was supported by the Assistant Secretary for Energy Efficiency and Renewable Energy, Vehicle Technology Office of the U.S. Department of Energy through the Advanced Battery Materials Research (BMR) Program under contract DE-SC0012704. This research used beamline 23-ID-2 and 28-ID-2 of the National Synchrotron Light Source II, a U.S. Department of Energy (DOE) Office of Science User Facility operated for the DOE Office of Science by Brookhaven National Laboratory under Contract No. DE-SC0012704.

Preparation and performance study of a PVDF–LATP ceramic composite polymer electrolyte membrane for solid-state batteries

Complementary Hybrid Design of Solvated Electrolyte Membranes Enabled by Porous Carbon Reinforcement for High-Performance Lithium Batteries

Preparation and Study of a Simple Three-Matrix Solid Electrolyte Membrane in Air

Building a Highly Functional Li1.3Al0.3Ti1.7(PO4)3/poly (vinylidene Fluoride) Composite Electrolyte for All-Solid-state Lithium Batteries

Electrochemical and Structural Study on PVDF-Based Polymer Electrolytes for Solid-State Batteries

Preparation and Study of Poly(Vinylidene Fluoride-Co-Hexafluoropropylene)-Based Composite Solid Electrolytes

Preparation and Characterization of a Novel Kind of Polymer Electrolyte Composite Membrane for Lithium-Ion Battery

Composite polymer electrolyte based on poly(vinylidene fluoride-hexafluoropropylene) (PVDF-HFP) for solid-state batteries

Preparation and Characteriza-Tion of a Novel Composite Mi-Croporous Polymer Electrolyte for Li-ion Batteries

Strippable and flexible solid electrolyte membrane by coupling Li6.4La3Zr1.4Ta0.6O12 and insulating polyvinylidene fluoride for solid state lithium ion battery

Free-Standing and Flexible Garnet-PVDF Ceramic Polymer Electrolyte Membranes for Solid-State Batteries

PVDF-HFP/PAN/PDA@LLZTO Composite Solid Electrolyte Enabling Reinforced Safety and Outstanding Low-Temperature Performance for Quasi-Solid-State Lithium Metal Batteries

Incorporating lithium magnesium silicate into PVDF-HFP based solid electrolyte to achieve advanced solid-state lithium-ion batteries

Preparation and Characterization of Safety Pvdf/P(Mma-Co-Pegma) Active Separators by Studying the Liquid Electrolyte Distribution in This Kind of Membrane

Ultraviolet-thermal coupling cross-linked fabricate polymer/ceramic composite solid electrolyte for room temperature quasi solid state lithium ion batteries

Across Interfacial Li + Conduction Accelerated by a Single-Ion Conducting Polymer in Ceramic-Rich Composite Electrolytes for Solid-State Batteries

Preparation and performance evaluation of organophilic nano-montmorillonite conducting polymer electrolyte for all-solid-state lithium ion batteries

Transparent PVDF-based electrolyte enabled by lipophilic lithium magnesium silicate for solid-state lithium batteries

Rechargeable Solid-State Lithium Metal Batteries with Vertically Aligned Ceramic Nanoparticle/polymer Composite Electrolyte

Modification of Solid Electrolyte Interface Layer Between PVDF-based Electrolyte and Lithium Anode

Facile Interfacial Modification Via In-Situ Ultraviolet Solidified Gel Polymer Electrolyte for High-Performance Solid-State Lithium Ion Batteries