Abstract:The demand for polished silicon wafers has increased significantly in recent years to cater to the development of the semiconductor industry. For example, polished silicon wafer has direct applications in integrated circuits, radio frequency amplifiers, micro-processors, micro-electromechanical systems, etc. To carry out mechanical polishing, lapping, grinding, or single-point diamond turning of silicon, diamond abrasives were extensively used before the implementation of chemo-mechanical polishing. During the diamond-based polishing, a few problems have already been identified, such as the formation of an amorphous phase, heat-affected zones, low material removal, etc. Some research work has also reported that nano-structured abrasives lead to a thin layer of the amorphous phase and a better material removal rate. In the same direction, a molecular dynamics simulation is carried out in this paper to investigate the mechanism of material removal from monocrystalline silicon during the diamond-abrasive-based polishing process. The present work is mainly focused on the dynamics of material removal phenomena near the abrasive particles at the nanometric scale by considering stress, lattice, cohesive energy, etc. This reveals that a higher value of indentation force results in surface buckling, which creates a zone of both compressive and tensile stresses, which increases the coordination number and forms β-silicon just ahead of the abrasive particle. This mechanism happens by developing a β-silicon phase on the surface with a thickness beyond a certain value of indentation force on the zone of compression. Buckling on this phase happens due to stress localisation in compression, as the flow stress of this phase is less than that of diamond cubic lattices. To avoid the mechanism of surface buckling and process silicon material on the surface, the indentation force needs to be maintained below a critical value. In the present case, it was found that the indentation force of less than or equal to 190 nN for the abrasive size of φ8 nm does the material removal by surface processing only without surface buckling. It was also found that surface processing helps to reduce the depth of the amorphous layer significantly without compromising the material removal rate or the generation of a wavy surface. Thus, the present mechanism will help in the polishing of silicon with minimum defects and reduce processing time for the final stage of polishing towards manufacturing ultra-smooth and planer surfaces.

Polishing of {100} and {111} single crystal diamond through the use of Chemical Mechanical Polishing

Roughness Control in the Processing of 2-Inch Polycrystalline Diamond Films on 4H-Sic Wafers

A Systematic Study of the Factors Affecting the Surface Quality of Chemically Vapor-Deposited Diamond during Chemical and Mechanical Polishing

Effect of slurry composition on the chemical mechanical polishing of thin diamond films

Polishing single-crystal silicon carbide with porous structure diamond and graphene-TiO2 slurries

Optical Quality Laser Polishing of CVD Diamond by UV Pulsed Laser Irradiation

Mechanism of surface modification on monocrystalline silicon during diamond polishing at nanometric scale

Approach: developing nano/sub-micron diamond slurry technology for enhanced precision polishing of optoelectronic materials

A novel slurry for chemical mechanical polishing of single crystal diamond

Polishing and planarization of single crystal diamonds: state-of-the-art and perspectives

Chemical/mechanical Polishing of Diamond Films Assisted by Molten Mixture of LiNO3 and KNO3

Redox agent enhanced chemical mechanical polishing of thin film diamond

A review of techniques for polishing and planarizing chemically vapor-deposited (CVD) diamond films and substrates

Polishing Characteristics on Silicon Wafer Using Fixed Nano-Sized Abrasive Pad

Characterization of Polish-Induced Gouges on Single Crystal Sapphire Substrates

Investigation into Polishing Process of CVD Diamond Films

Femtosecond and nanosecond laser polishing of rough polycrystalline diamond

Effects of processing parameters and grinding direction on the material removal mechanism of (100) surface single crystal diamond in self-rotating mechanical grinding

Mechanism of polishing lutetium oxide single crystals with polyhedral diamond abrasive grains based on molecular dynamics simulation

A Review on Precision Polishing Technology of Single-Crystal SiC

Smoothing of single crystal diamond by high-speed three-dimensional dynamic friction polishing: Optimization and surface bonds evolution mechanism