Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

A Planar Coil-Based Novel Two-Channel Differential Inductive Tilt Sensor With a Simple Pendulum Mechanism

A Liquid-Surface-Based Three-Axis Inclination Sensor for Measurement of Stage Tilt Motions

A Novel Triangular-Electrode Based Capacitive Sensing Method for MEMS Resonant Devices

Optical Tilt Sensor with Direct Intensity-Modulated Scheme

The Study of a Novel Tilt Sensor Using Magnetic Fluid and Its Detection Mechanism

A Compact Planar Inductive Angular Sensor with Small Latency and Low Power Consumption

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

A Novel Two-Dimensional Sensor With Inductive Spiral Coils

2-D Tilt Sensor Based on Coaxial Cable Fabry–Perot Resonators With Submicroradian Resolution

A Variable Reluctance-Based Planar Dual-Coil Angle Sensor With Enhanced Linearity

Ferrofluid transformer-based tilt sensor

A Full 360° Measurement Range Liquid Capacitive Inclinometer with a Triple- Eccentric-Ring Sensing Element and Differential Detection Scheme

A Noncontact Angle Sensor Based on Eddy Current Technique

Misalignment-Tolerant Planar Spiral Coil Pair Design for 13.56 MHz Inductive Coupling of Wireless Resistive Analog Passive Sensors

Design and Analysis of Receiver Coils with Multiple In-Series Windings for Inductive Eddy Current Angle Position Sensors Based on Coupling of Coils on Printed Circuit Boards

An Inductive Sensor for Two-Dimensional Displacement Measurement

A Novel Ferrofluid Inclinometer Exploiting a Hall Element

A Biaxial Resonant Tilt Sensor with Two-Stage Microleverage Mechanisms

An Inductive Sensor for the Angular Displacement Measurement of Large and Hollow Rotary Machinery

Inductive Micro Tri-Axial Tactile Sensor Using a CMOS Chip with a Coil Array