Abstract:Tilt angle measurement in dynamic systems is problematic because the rotation of the measured platform is coupled with translation. Therefore, when some sensors are applied in dynamic systems, their output signals are often submerged in the noise signals generated by translation. To enhance the ability of tilt sensors to resist translational noise, a dynamic tilt sensor is proposed based on the principle of variable reluctance from the perspective of sensor structure. The eccentric structure of the sensor constructed with a shell, liquid, and internal damping plate was designed according to the principles of mechanics. The characteristic of translational acceleration restraint determined by the sensor structure was established theoretically. In addition, the magnetic circuit of the sensor was analyzed to illustrate the sensor’s working principles. A Clapp oscillator circuit was designed to convert mechanical motion into a measureable electrical signal. A method to determine the sensor’s direction of rotation is proposed. A waveform conversion circuit was designed to convert the sine wave output of the Clapp oscillator to a square wave, and a square-wave frequency measurement circuit was designed based on the C8051 micro-control unit. A translation–rotation experimental hardware platform was constructed. The data acquisition program was designed on a PC platform, and the translation–rotation experiments were conducted with an MTi attitude measurement unit as a reference. The validity of the tilt angle measurements and the effect of the translational acceleration restraint of the sensor were verified by the experimental data. The theoretical results obtained were consistent with the experimental data, verifying the validity of the theoretical analysis and experimental devices employed. A measurement range of −180 to 180° was achieved.

Ferrofluid transformer-based tilt sensor

The Study of a Novel Tilt Sensor Using Magnetic Fluid and Its Detection Mechanism

A Novel Ferrofluid Inclinometer Exploiting a Hall Element

Research on a Novel Ferrofluid Inertial Sensor with Levitating Nonmagnetic Rod

Ferrofluid Acceleration Sensors

The Theoretical and Experimental Study of a Ferrofluid Inertial Sensor

Experimental Research on Tilt Measurement Sensor Based Magnetic Fluid

Ferrofluidic torsional pendulum driven by oscillating magnetic field

Design and Implementation of a Novel Tilt Sensor Based on the Principle of Variable Reluctance

A Planar Coil-Based Novel Two-Channel Differential Inductive Tilt Sensor With a Simple Pendulum Mechanism

A novel accelerometer based on the first kind of ferrofluid levitation principle

An Electrochemical Tilt Sensor with Double-Band Electrodes Fabricated by Wire Winding

Parameter design and dynamic stability of controllable damping ferrofluid bearing

Bioinspired Intelligent Ferrofluid: Old Magnetic Material with New Optical Properties

Inductive Level Measurement Sensor with Magnetic Fluid

Flexible Ferrofluids: Design and Applications

Magnetic Field Sensor Based on Photonic Crystal Fiber Taper Coated with Ferrofluid

Influence of Ferrofluid Properties on Output Performance of Differential Pressure Sensor

Design and Output Characterization of Ferrofluid Acceleration Sensor

Measurement of Surface Tension of Ferrofluids

Typical Dampers and Energy Harvesters Based on Characteristics of Ferrofluids