Abstract:This paper describes resonant wireless strain sensors fabricated from magnetoelastic alloys. The transduction mechanism is the $\Delta{\rm E}$ effect—the change in stiffness of magnetoelastic materials with applied strain or magnetic field. This is measured as a shift in the resonant frequency and is detected wirelessly using pick-up coils utilizing the magnetoelastic coupling of these materials. The sensors are fabricated from a 28- $\mu{\rm m}$ -thick foil of Metglas 2826 MB $({\rm Fe}_{40}{\rm Ni}_{\rm 38}{\rm Mo}_{\rm 4}{\rm B}_{18})$ , a ferromagnetic magnetoelastic alloy, using microelectrodischarge machining. Two sensor types are described—single and differential. The single sensor has an active area of 7 $\,\times\,$ 2 ${\rm mm}^{2}$ , excluding the anchors. At 23 $^{\circ}{\rm C}$ , it operates at a resonant frequency of 230.8 kHz and has a sensitivity of $13\times 10^{3}~{\rm ppm}/{\rm mstrain}$ ; the dynamic range is 0.05–1.05 mstrain. The differential sensor includes a strain independent reference resonator of area 2 $\,\times\,$ 0.5 ${\rm mm}^{2}$ in addition to a sensing element of area 2.5 $\,\times\,$ 0.5 ${\rm mm}^{2}$ that is divided into two segments. The sensor resonance is at 266.4 kHz and reference resonance is at 492.75 kHz. The differential sensor provides a dynamic range for 0–1.85 mstrain with a sensitivity of $12.5\times 10^{3}~{\rm ppm}/{\rm mstrain}$ at 23 $^{\circ}{\rm C}$ . The reference resonator of the differential sensor is used to compensate for the temperature dependence of the Young's modulus of Metglas 2826 MB, which is experimentally estimated to be ${-}{\rm 524}~{\rm ppm}/^{\circ}{\rm C}$ . For an increment of 35 $^{\circ}{\rm C}$ , uncompensated sensors exhibit a resonant frequency shift of up to 42% of the dynamic range for the single sensor and 30% of the dynamic range of the differential sensor, underscoring the necessity of temperature compensation. The geometry of both types of sensors can be modified to accommodate a variety of sensitivity and dynamic range requirements. $\hfill{[2013\hbox{-}0330]}$

An Electrochemical Tilt Sensor with Double-Band Electrodes Fabricated by Wire Winding

Simulation and Design of Piezoelectric Microcantilever Chemical Sensors

A Biaxial Resonant Tilt Sensor with Two-Stage Microleverage Mechanisms

A Micro-wires Based Tactile Sensor for Prosthesis.

A Novel Single-Axis MEMS Tilt Sensor with a High Sensitivity in the Measurement Range from 0∘ to 360∘

Magnetostrictive Tactile Sensor Array Based on L-Shaped Galfenol Wire and Application for Tilt Detection

Liquid Metal-Based Wearable Tactile Sensor for Both Temperature and Contact Force Sensing

Flexible Electromagnetic Tactile Sensor Based on Double‐Layer High‐Density MEMS Coils and Tilted Magnetic Column Array

Development of Wearable Tactile Sensor Based on Galinstan Liquid Metal for Both Temperature and Contact Force Sensing.

The MEMS-Based Electrochemical Seismic Sensor With Integrated Sensitive Electrodes by Adopting Anodic Bonding Technology

A Direct-Reading MEMS Conductivity Sensor with a Parallel-Symmetric Four-Electrode Configuration

The Study of a Novel Tilt Sensor Using Magnetic Fluid and Its Detection Mechanism

A Flexible and Ultra-Highly Sensitive Tactile Sensor through a Parallel Circuit by a Magnetic Aligned Conductive Composite

Passive Wireless Strain Sensors Using Microfabricated Magnetoelastic Beam Elements

A three-electrode multi-module sensor for accurate bodily-kinesthetic monitoring

Ferrofluid transformer-based tilt sensor

A robust and self-powered tilt sensor based on annular liquid-solid interfacing triboelectric nanogenerator for ship attitude sensing

A Planar Coil-Based Novel Two-Channel Differential Inductive Tilt Sensor With a Simple Pendulum Mechanism

Superstretchable Liquid-Metal Electrodes for Dielectric Elastomer Transducers and Flexible Circuits

Liquid Metal-Based Angle Detection Sensor

A Novel Electrodes Design for In-Plane Measurement of Single-Structure Multi-Axis MEMS Inertial Devices.