A high-resolution area-change-based capacitive MEMS tilt sensor
Kang Rao,Huafeng Liu,Xiaoli Wei,Wenjie Wu,Chenyuan Hu,Ji Fan,Jinquan Liu,Liangcheng Tu
DOI: https://doi.org/10.1016/j.sna.2020.112191
2020-10-01
Abstract:<p>Tilt sensors have been widely used in many applications, such as instrumentation leveling, oil drilling and structural health monitoring. With the rapid development of the micro-electromechanical system (MEMS) technology, MEMS accelerometer-based high-performance tilt sensors are capable of replacing conventional tilt sensors in most of application fields. High-sensitivity MEMS resonant accelerometers (MRAs) are fully qualified for tilt sensing. However, MRA chips have to be vacuum packaged and require complex circuits; therefore, they are difficult to be miniaturized and commercialized. In this case, this paper introduces a commercial-oriented capacitive MEMS accelerometer for tilt sensing with both high-resolution and compact size. The proposed MEMS sensor utilizes simplified fabrication processes, the area-change-based capacitive displacement transducer and the capacitance-to-voltage conversion application specific integrated circuit (ASIC) for low-cost, high-sensitivity, low power consumption and miniaturization. The developed MEMS sensor has a package dimension of 14 mm × 14 mm × 3.6 mm with a single +5 V power supply and analogue voltage output. Several evaluation experiments have been conducted with the results showing that the developed MEMS tilt sensor has a full measurement range of ±180°, a linear measurement range of ±30° with a nonlinearity of ±2.8%, a sensitivity of 33.6 mV/°, a noise floor of 2 × 10<sup>−4</sup>°/√Hz, a bandwidth of 100 Hz and an angle resolution of 7 × 10<sup>−4</sup>° with an integral time of 0.5 second. Compared with other commercial MEMS tilt sensors, the proposed sensor has a better resolution, a lower noise floor, a larger bandwidth, a lower power consumption and a smaller package. The simplified fabrication process and high performance suggest the developed MEMS tilt sensor is promising to be competitive in the market.</p>