Abstract:Tilt sensors have been widely used in many applications, such as instrumentation leveling, oil drilling and structural health monitoring. With the rapid development of the micro-electromechanical system (MEMS) technology, MEMS accelerometer-based high-performance tilt sensors are capable of replacing conventional tilt sensors in most of application fields. High-sensitivity MEMS resonant accelerometers (MRAs) are fully qualified for tilt sensing. However, MRA chips have to be vacuum packaged and require complex circuits; therefore, they are difficult to be miniaturized and commercialized. In this case, this paper introduces a commercial-oriented capacitive MEMS accelerometer for tilt sensing with both high-resolution and compact size. The proposed MEMS sensor utilizes simplified fabrication processes, the area-change-based capacitive displacement transducer and the capacitance-to-voltage conversion application specific integrated circuit (ASIC) for low-cost, high-sensitivity, low power consumption and miniaturization. The developed MEMS sensor has a package dimension of 14 mm × 14 mm × 3.6 mm with a single +5 V power supply and analogue voltage output. Several evaluation experiments have been conducted with the results showing that the developed MEMS tilt sensor has a full measurement range of ±180°, a linear measurement range of ±30° with a nonlinearity of ±2.8%, a sensitivity of 33.6 mV/°, a noise floor of 2 × 10−4°/√Hz, a bandwidth of 100 Hz and an angle resolution of 7 × 10−4° with an integral time of 0.5 second. Compared with other commercial MEMS tilt sensors, the proposed sensor has a better resolution, a lower noise floor, a larger bandwidth, a lower power consumption and a smaller package. The simplified fabrication process and high performance suggest the developed MEMS tilt sensor is promising to be competitive in the market.

3D Printed Capacitive Tilt Sensor

3D Printed Interdigitated Capacitor Based Tilt Sensor

Sensitivity Enhancement of Soft Capacitive Pressure Sensors Using a Solvent Evaporation-Based Porosity Control Technique.

A Full 360° Measurement Range Liquid Capacitive Inclinometer with a Triple- Eccentric-Ring Sensing Element and Differential Detection Scheme

Study on Design Optimization of a Capacitive Tilt Angle Sensor

3D-Printed Tilt Sensor Based on an Embedded Two-Mode Fiber Interferometer

A Capacitive MEMS Inclinometer Sensor with Wide Dynamic Range and Improved Sensitivity

Flexible Capacitive Tactile Sensor Array with Truncated Pyramids As Dielectric Layer for Three-Axis Force Measurement

Capacitive and Non-Contact Liquid Level Detection Sensor Based on Interdigitated Electrodes with Flexible Substrate

A High-Resolution, Ultrabroad-Range and Sensitive Capacitive Tactile Sensor Based on a CNT/PDMS Composite for Robotic Hands.

A Flexible and Robust Large Scale Capacitive Tactile System for Robots

Design and Fabrication of Flexible Capacitive Sensor With Cellular Structured Dielectric Layer via 3D Printing

High Sensitivity Flexible Capacitive Pressure Sensor Using Polydimethylsiloxane Elastomer Dielectric Layer Micro-Structured by 3-D Printed Mold

3D Printing of Liquid Metal Based Tactile Sensor for Simultaneously Sensing of Temperature and Forces

Fully 3D printed flexible, conformal and multi-directional tactile sensor with integrated biomimetic and auxetic structure

The Design and Numerical Simulation of a 3D-Printed Flexible Capacitive Pressure Sensor with a Composite Structure

A Flexible Capacitive 3D Tactile Sensor with Cross-Shaped Capacitor Plate Pair and Composite Structure Dielectric

Characterization and Benchmark of a Novel Capacitive and Fluidic Inclination Sensor

Design and 3D printing of a capacitive sensor for biomedical applications

A high-resolution area-change-based capacitive MEMS tilt sensor

Broad detection range of flexible capacitive sensor with 3D printed interwoven hollow dual-structured dielectric layer