Abstract:<p>In this work, a novel 3D-printed biaxial sensor system for tilt measurement, based primarily on the use of four Fiber Bragg Grating (FBG) devices, has been developed and its performance characterized. The tilt sensor system created is of a compact design and relatively small dimensions, making it ideally suited to a variety of industrial applications. In the system developed, the four FBGs used were spliced in a serial formation and attached to four different sides of the sensor structure designed, to allow biaxial measurements to be made. The wavelengths' shift of the FBGs used were monitored as a function of the tilt of the device, using an Optical Spectrum Analyzer (OSA) for this development work. In the sensor, an average FBG-based responsivity of 0.01 nm/° of tilt was measured for each of the different FBGs used. To provide compensation for temperature changes in the system itself, a further FBG-based approach was used (in which they were configured to be insensitive to the effect of the tilt). They were thus calibrated by being exposed to a range of operational temperatures for the system, showing, as a result, a calibration of 0.011 nm/°C. Prior work on the sensor system had proved it to be highly linear in response, over the tilt range of 0° ± 90°. The experimental results obtained from the performance characterization indicate that the small, compact design of this type yields excellent responsivity, compared to other larger and more complex designs discussed in the literature. The sensor system was also relatively easy to fabricate using the 3D-printing method, creating in that way an inexpensive, temperature-compensated tilt monitoring device that had a wide variety of potential industrial applications.</p>

3D-Printed Tilt Sensor Based on an Embedded Two-Mode Fiber Interferometer

Highly Sensitive Temperature Sensor Using Intrinsic Mach-Zehnder Interferometer Formed by Bent Micro-Fiber Embedded in Polymer

Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approach

Surface-mounted tilt sensor using fiber Bragg grating technology for engineered slope monitoring with temperature compensation

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

A FBG Tilt Sensor Fabricated Using 3D Printing Technique for Monitoring Ground Movement

Ultra-Compact Full-Angle-Range Direction-Distinguishable Tilt Sensor Based on Fiber in-Line Polymer Microcavity

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

An Inline Fiber Curvature Sensor Based on Eccentric Core Fiber and Off-Axis Air Cavity Fabry-Pérot Interferometer

Fiber Bragg grating biaxial tilt sensor using one optical fiber

Temperature-independent fiber bragg grating tilt sensor

3D Printed Interdigitated Capacitor Based Tilt Sensor

Highly Compact Vector Bending Sensor With Microfiber-Assisted Mach– Zehnder Interferometer

Design and Investigation of a High-Sensitivity Tilt Sensor Based on FBG

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure

Laser-induced Suspension of a Microbubble in a Liquid-Filled Fiber Microcavity for Large-Range Tilt Sensing.

3D Printed Capacitive Tilt Sensor

Ultrasensitive Temperature and Strain Sensor Based on a Hybrid Fiber Interferometer With the Vernier Effect

Displacement Sensor Based on a Small U-Shaped Single-Mode Fiber