Abstract:<p>In this work, a novel 3D-printed biaxial sensor system for tilt measurement, based primarily on the use of four Fiber Bragg Grating (FBG) devices, has been developed and its performance characterized. The tilt sensor system created is of a compact design and relatively small dimensions, making it ideally suited to a variety of industrial applications. In the system developed, the four FBGs used were spliced in a serial formation and attached to four different sides of the sensor structure designed, to allow biaxial measurements to be made. The wavelengths' shift of the FBGs used were monitored as a function of the tilt of the device, using an Optical Spectrum Analyzer (OSA) for this development work. In the sensor, an average FBG-based responsivity of 0.01 nm/° of tilt was measured for each of the different FBGs used. To provide compensation for temperature changes in the system itself, a further FBG-based approach was used (in which they were configured to be insensitive to the effect of the tilt). They were thus calibrated by being exposed to a range of operational temperatures for the system, showing, as a result, a calibration of 0.011 nm/°C. Prior work on the sensor system had proved it to be highly linear in response, over the tilt range of 0° ± 90°. The experimental results obtained from the performance characterization indicate that the small, compact design of this type yields excellent responsivity, compared to other larger and more complex designs discussed in the literature. The sensor system was also relatively easy to fabricate using the 3D-printing method, creating in that way an inexpensive, temperature-compensated tilt monitoring device that had a wide variety of potential industrial applications.</p>

Fiber Bragg grating biaxial tilt sensor using one optical fiber

Temperature-independent fiber bragg grating tilt sensor

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

Optical Inclinometer Based on a Single Long-Period Fiber Grating Combined with a Large Lateral Offset

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approach

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

In-Fiber Twist Sensor Based on a Fiber Bragg Grating with 81 $^{\circ}$ Tilted Structure

A Real-Time Inclinometer Based On An Etched Fiber Bragg Grating Connected To Hollow-Core Fiber

A Fiber Bragg grating based tilt sensor suitable for constant temperature room

A Fiber Bragg Grating Sensing Based Triaxial Vibration Sensor

Design and Investigation of a High-Sensitivity Tilt Sensor Based on FBG

In-Fibre Directional Transverse Loading Sensor Based on Excessively Tilted Fibre Bragg Gratings

Design and Investigation of a Fiber Bragg Grating Tilt Sensor With Vibration Damping

Surface-mounted tilt sensor using fiber Bragg grating technology for engineered slope monitoring with temperature compensation

Orientation-dependent Optic-Fiber Accelerometer Based on Excessively Tilted Fiber Grating

Cantilever optical vibrometer using fiber Bragg grating

Analyzing The Applicability Of Side-Polished Fiber Bragg Grating Tilt Sensor Using Liquid Pendulum With Controllable Angle

An All-Fiber Optical Sensor Combined with FBG and CFBG-FP for Attitude Estimation

Temperature-Insensitive Real-Time Inclinometer Based on an Etched Fiber Bragg Grating