Abstract:<p>In this work, a novel 3D-printed biaxial sensor system for tilt measurement, based primarily on the use of four Fiber Bragg Grating (FBG) devices, has been developed and its performance characterized. The tilt sensor system created is of a compact design and relatively small dimensions, making it ideally suited to a variety of industrial applications. In the system developed, the four FBGs used were spliced in a serial formation and attached to four different sides of the sensor structure designed, to allow biaxial measurements to be made. The wavelengths' shift of the FBGs used were monitored as a function of the tilt of the device, using an Optical Spectrum Analyzer (OSA) for this development work. In the sensor, an average FBG-based responsivity of 0.01 nm/° of tilt was measured for each of the different FBGs used. To provide compensation for temperature changes in the system itself, a further FBG-based approach was used (in which they were configured to be insensitive to the effect of the tilt). They were thus calibrated by being exposed to a range of operational temperatures for the system, showing, as a result, a calibration of 0.011 nm/°C. Prior work on the sensor system had proved it to be highly linear in response, over the tilt range of 0° ± 90°. The experimental results obtained from the performance characterization indicate that the small, compact design of this type yields excellent responsivity, compared to other larger and more complex designs discussed in the literature. The sensor system was also relatively easy to fabricate using the 3D-printing method, creating in that way an inexpensive, temperature-compensated tilt monitoring device that had a wide variety of potential industrial applications.</p>

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

Temperature-independent fiber bragg grating tilt sensor

A Novel Temperature-Independent Double Fiber Bragg Grating Strain Sensor

Development of Fiber Bragg Grating-Based Temperature Insensitive Novel All Optical Tilt Sensor

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure

A Fiber Bragg grating based tilt sensor suitable for constant temperature room

Surface-mounted tilt sensor using fiber Bragg grating technology for engineered slope monitoring with temperature compensation

Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approach

Temperature-Insensitive Embedded Metal-Packaged Fiber Bragg Grating Inclination Sensor

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

Cascaded Fabry-Perot Interferometer-Regenerated Fiber Bragg Grating Structure for Temperature-Strain Measurement under Extreme Temperature Conditions.

Ultrasensitive Parallel Double-Fpis Sensor Based on Vernier Effect and Type II Fiber Bragg Grating for Simultaneous Measurement of High Temperature and Strain

Optic Sensors of High Refractive-Index Responsivity and Low Thermal Cross Sensitivity That Use Fiber Bragg Gratings of >80 Degrees Tilted Structures.

A novel temperature-insensitive fiber Bragg grating sensor for displacement measurement

Fiber Bragg grating biaxial tilt sensor using one optical fiber

Design and Investigation of a Fiber Bragg Grating Tilt Sensor With Vibration Damping

Design and Investigation of a High-Sensitivity Tilt Sensor Based on FBG

Temperature-Insensitive Fibre-Optic Acceleration Sensor Based On Intensity-Referenced Fibre Bragg Gratings

Temperature-Independent Fiber Bragg Grating Micro-Displacement Sensor

Research on sensitive characteristics of tilted fiber grating sensors