Abstract:<p>In this work, a novel 3D-printed biaxial sensor system for tilt measurement, based primarily on the use of four Fiber Bragg Grating (FBG) devices, has been developed and its performance characterized. The tilt sensor system created is of a compact design and relatively small dimensions, making it ideally suited to a variety of industrial applications. In the system developed, the four FBGs used were spliced in a serial formation and attached to four different sides of the sensor structure designed, to allow biaxial measurements to be made. The wavelengths' shift of the FBGs used were monitored as a function of the tilt of the device, using an Optical Spectrum Analyzer (OSA) for this development work. In the sensor, an average FBG-based responsivity of 0.01 nm/° of tilt was measured for each of the different FBGs used. To provide compensation for temperature changes in the system itself, a further FBG-based approach was used (in which they were configured to be insensitive to the effect of the tilt). They were thus calibrated by being exposed to a range of operational temperatures for the system, showing, as a result, a calibration of 0.011 nm/°C. Prior work on the sensor system had proved it to be highly linear in response, over the tilt range of 0° ± 90°. The experimental results obtained from the performance characterization indicate that the small, compact design of this type yields excellent responsivity, compared to other larger and more complex designs discussed in the literature. The sensor system was also relatively easy to fabricate using the 3D-printing method, creating in that way an inexpensive, temperature-compensated tilt monitoring device that had a wide variety of potential industrial applications.</p>

Development of Fiber Bragg Grating-Based Temperature Insensitive Novel All Optical Tilt Sensor

Temperature-Insensitive Fiber Bragg Grating Based Tilt Sensor with Large Dynamic Range

Temperature-independent fiber bragg grating tilt sensor

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

Highly Sensitive FBG Based Tilt Sensor Using PM-IM Conversion and EFD Interrogation Technique

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure

Novel 3D-printed biaxial tilt sensor based on fiber Bragg grating sensing approach

Optic Sensors of High Refractive-Index Responsivity and Low Thermal Cross Sensitivity That Use Fiber Bragg Gratings of >80 Degrees Tilted Structures.

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

Research on sensitive characteristics of tilted fiber grating sensors

Surface-mounted tilt sensor using fiber Bragg grating technology for engineered slope monitoring with temperature compensation

Fiber Bragg grating sensing system for temperature measurements based on optically injected DFB-LD with an OEO loop

Fiber Bragg grating biaxial tilt sensor using one optical fiber

Design and Investigation of a Fiber Bragg Grating Tilt Sensor With Vibration Damping

In-fiber Bragg-grating Temperature Sensor System for Medical Applications

Recent advances and current trends in optical fiber biosensors based on tilted fiber Bragg gratings

Design and Investigation of a High-Sensitivity Tilt Sensor Based on FBG

Research on Temperature Independent Fbg Obliquity Sensor

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

Reflective Optical Fiber Sensors Based on Tilted Fiber Bragg Gratings Fabricated With Femtosecond Laser

800 Nm Wdm Interrogation System for Strain, Temperature, and Refractive Index Sensing Based on Tilted Fiber Bragg Grating