Abstract:A temperature-compensated fiber Bragg grating (FBG) axial strain sensor based on a two-dual-loop optoelectronic oscillator (OEO) with the enhanced Vernier effect is proposed and experimentally demonstrated. The sensing head consists of two cascaded FBGs, one of which acts as a sensing FBG to measure both the axial strain and temperature and the other as a reference FBG to detect temperature. Acting as the optical carrier, the reflected optical signal of the sensing head is divided into two paths with opposite dispersion coefficients and slightly different lengths to achieve an enhanced Vernier effect. After being divided by a wavelength division multiplexer, the optical signal launches into two electrical paths with different electrical bandpass filters (EBPFs) for frequency division multiplexing. The EBPF I selects the microwave signal generated by the sensing FBG, while the EBPF II selects the microwave signal generated by the reference FBG. Therefore, the axial strain and temperature can be recovered by recording the microwave frequency within EBPF I, and the temperature can be interrogated by tracking the microwave frequency within EBPF II. The axial strain applied on the sensing FBG can be distinguished by solving the cross-sensitivity matrix. The results show that the sensitivity of the dual-loop OEO is much greater than that of the single-loop OEO. The maximum measurement error for the axial strain is 0.112µε, and the maximum temperature compensation error is as low as 0.024°C in the dual-loop OEO, which is far less than that in the single-loop OEO. The enhanced Vernier effect not only improves the sensitivity, but also reduces the temperature compensation error.

Research on Temperature Independent Fbg Obliquity Sensor

Temperature-independent fiber bragg grating tilt sensor

Design and Analysis of a Combined FBG Sensor for the Measurement of Three Parameters.

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Temperature-insensitive two-dimensional tilt sensor based on cylindrical pendulum and FBGs

An FBG-Based 2-D Vibration Sensor with Adjustable Sensitivity

Temperature-Insensitive Fiber Bragg Grating Sensing System for Curvature Measurement Based on Optoelectronic Oscillator With the Enhanced Vernier Effect

Development of Fiber Bragg Grating-Based Temperature Insensitive Novel All Optical Tilt Sensor

High-precision temperature-compensated fiber Bragg grating axial strain sensing system based on a dual-loop optoelectronic oscillator with the enhanced Vernier effect

Simultaneous Measurement of Displacement and Temperature Using In-Fibre-bragg-grating-based Extrinsic Fizeau Sensor

Simultaneous Independent Temperature and Strain Measurement Using One Fiber Bragg Grating Based on the Etching Technique

A Temperature and Strain Sensor Based on a Cascade of Double Fiber Bragg Grating

An FBG-Sensing Two-Dimensional Vibration Sensor Based on Multi-Axis Flexure Hinge

Temperature-Insensitive Strain Sensor Based on the Measurement of Reflected Bandwidth from Tapered Fiber Grating by A Scanning Fbg

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

FBG Sensor Interrogation Based on RF Signal Measurement

Highly Sensitive Optoelectronic Oscillator-Based FBG Sensor via Coarse Sampling and Vernier Effect

Study On Fbg-Based Sensor For Simultaneous Dual-Measurement Of Pressure And Temperature

A Fiber Bragg Grating Sensor for Positive and Negative Displacement Measurement