Abstract:In recent years, the importance of reliable displacement detection for structural condition monitoring has grown significantly for applications requiring high-sensitivity devices to meet the diverse needs of various applications, ranging from millimeters to micrometers. This study focuses on fabricating and characterizing three polydimethylsiloxane (PDMS) based devices designed for displacement detection through curvature variation, each incorporating an embedded fiber Bragg grating (FBGs). These devices comprise a solid piece, one with three central perforations (hollow) and another with three notches (notched), that allow greater deformation in the structure, which implies greater sensitivity. A comprehensive assessment was conducted for various displacement and temperature conditions. Because embedded FBGs experience tensile or compressive deformations contingent on the bending direction of the devices, they demonstrate a wider measurement range without compromising sensitivity. One of the most notable findings of this study is the heightened sensitivity observed in hollow and notched devices compared with solid devices. Incorporating these geometric variations facilitates stress concentration owing to the curvature changes. In a simultaneous evaluation, the three devices were subjected to millimetric and micrometric displacements, which allowed the evaluation of individual parameters such as curvature and displacement sensitivity, in addition to temperature sensitivity, hysteresis errors, linearity, and repeatability of the measurements. The Solid device has a sensitivity of 112.7 pm/mm, while the perforated and notched devices show higher sensitivities of up to 159.5 pm/mm and 162.7 pm/mm, respectively. This represents increases of 41.5 % and 44.36 %, respectively. This study contributes to the advancement of displacement sensing technologies and offers practical solutions for various structural monitoring applications.

A Fiber Bragg Grating Sensor for Positive and Negative Displacement Measurement

Highly Sensitive Displacement Sensor Based on Composite Interference Established Within a Balloon-Shaped Bent Multimode Fiber Structure.

Simultaneous Measurement of Displacement and Temperature Based on a Balloon-Shaped Bent SMF Structure Incorporating an LPG

Simultaneous Measurement of Displacement and Temperature Based on Two Cascaded Balloon-Like Bent Fibre Structures

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Study of Fiber Grating Displacement Sensor

Fiber-Bragg-Grating-Based Displacement Sensors: Review of Recent Advances

Fiber Bragg Grating Displacement Sensor with High Abrasion Resistance for a Steel Spring Floating Slab Damping Track

A Double FBGs Temperature Self-Compensating Displacement Sensor and Its Application in Subway Monitoring

Temperature insensitive fiber optical displacement sensors based on double fiber Bragg gratings

Research On Measurement Of Fiber Bragg Grating Considering The Cross-Sensitivity Of Temperature And Strain

Dynamic Sensing Performance of a Point-Wise Fiber Bragg Grating Displacement Measurement System Integrated in an Active Structural Control System

Enhanced PDMS-embedded FBG devices for displacement sensing

A novel fiber Bragg grating vibration sensor with double equal-strength cantilever beams

An FBG Displacement Sensor in Deformation Monitoring of Subway Floating Slab

Cantilever optical vibrometer using fiber Bragg grating

Development of a High-Sensitivity and Adjustable FBG Strain Sensor for Structural Monitoring

A Method of Strain Measurement Based on Fiber Bragg Grating Sensors

Simultaneous measurement of dynamic displacement and strain in a single fiber using coarse wavelength-division multiplexing and fiber Bragg-grating filter-based sensing system

Research on a Multiplexed Interferometry Technique for Absolute Displacement Measurement

Wide-Range Fiber Bragg Grating Tilt Sensor Based on a Cam Structure