Abstract:Monitoring geotechnical structures and providing real-time early warning is a key measure to mitigate the impacts of disasters (slope slip, subsidence, dam deformation, bridge settlement, etc.). The fiber Bragg grating (FBG) flexible sensor, developed by the combination of flexible material and an FBG sensor, is widely used in geotechnical engineering health monitoring due to its excellent performance. The flexible sensor can perform regional and quasi-distributed measurements of the displacement field of the measured structure, and accurately reflect the operating state of the engineering structure. However, in practical engineering applications, factors such as the strain-transfer rate between the flexible substrate and sensing points, the displacement reconstruction algorithm, and the arrangement interval of the sensing points can cause measurement error, which, in turn, leads to a decrease in the displacement-measurement accuracy. In this paper, the following analysis is performed by means of theoretical derivation and model establishment. The influence of the length, width, and thickness of the cemented layer, the shear modulus of the flexible substrate, and the radius of the groove on the strain-transfer rate were analyzed, and the referential parameters were determined. The displacement reconstruction algorithm is essentially a recursive algorithm, which inevitably introduces cumulative error; the relationship between the layout interval of the sensing points and the measurement error is discussed. Considering the fabrication cost of the sensor and the allowable range of error, a sensing-point-layout interval of 100 mm was chosen. The feasibility and effectiveness of the simulation theory were verified by carrying out deformation-sensing experiments on the developed FBG flexible sensor. The research results can theoretically guide the packaging and fabrication of the FBG flexible sensor, thereby improving the measurement accuracy of the flexible sensor for the measured structure.

An FBG Displacement Sensor in Deformation Monitoring of Subway Floating Slab

A Double FBGs Temperature Self-Compensating Displacement Sensor and Its Application in Subway Monitoring

Structural Instability-Enabled Mechanical Sensors Using Fiber Bragg Grating

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Fiber Bragg Grating Displacement Sensor with High Abrasion Resistance for a Steel Spring Floating Slab Damping Track

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Optimal design of FBG flexible sensor for high-precision monitoring of three-dimensional deformation of power transmission line tower foundation

Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars

Simultaneous Measurement of Strain and Displacement for Railway Tunnel Lining Safety Monitoring

Safety monitoring of railway tunnel construction using FBG sensing technology

A New Flexible FBG Sensing Beam for Measuring Dynamic Lateral Displacements of Soil in a Shaking Table Test

Real-time strain monitoring and control of urban bridge cluster monitoring system with FBG sensor

A Fiber Bragg Grating Sensor for Positive and Negative Displacement Measurement

DEFORMATION MONITORING OF DAM MODEL TEST BY OPTICAL FIBER SENSORS

Measurement-Error Analysis of Fiber Bragg Grating Flexible Sensor for Displacement-Field Monitoring of Geotechnical Engineering

Deep displacement monitoring and foundation base boundary reconstruction analysis of diaphragm wall based on ultra-weak FBG

Study of Fiber Grating Displacement Sensor

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

Enhanced PDMS-embedded FBG devices for displacement sensing

Ground Movement Monitoring Using an Optic Fiber Bragg Grating Sensored System

Internal Deformation Monitoring for Centrifuge Slope Model with Embedded FBG Arrays