Abstract:In the past few years, fiber optic sensing technologies have played an increasingly important role in the health monitoring of civil infrastructures. These innovative sensing technologies have recently been successfully applied to the performance monitoring of a series of geotechnical structures. Fiber optic sensors have shown many unique advantages in comparison with conventional sensors, including immunity to electrical noise, higher precision and improved durability and embedding capabilities; fiber optic sensors are also smaller in size and lighter in weight. In order to explore the mechanism of seepage-induced slope instability, a small-scale 1 g model test of the soil slope has been performed in the laboratory. During the model's construction, specially fabricated sensing fibers containing nine fiber Bragg grating (FBG) strain sensors connected in a series were horizontally and vertically embedded into the soil mass. The surcharge load was applied on the slope crest, and the groundwater level inside of the slope was subsequently varied using two water chambers installed besides the slope model. The fiber optic sensing data of the vertical and horizontal strains within the slope model were automatically recorded by an FBG interrogator and a computer during the test. The test results are presented and interpreted in detail. It is found that the gradually accumulated deformation of the slope model subjected to seepage can be accurately captured by the quasi-distributed FBG strain sensors. The test results also demonstrate that the slope stability is significantly affected by ground water seepage, which fits well with the results that were calculated using finite element and limit equilibrium methods. The relationship between the strain measurements and the safety factors is further analyzed, together with a discussion on the residual strains. The performance evaluation of a soil slope using fiber optic strain sensors is proved to be a potentially effective approach.

DEFORMATION MONITORING OF DAM MODEL TEST BY OPTICAL FIBER SENSORS

Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars

Application of small FBG strain sensors in dam model experiment

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

Application of FBG sensors in rolled concrete dam model

Experimental Study on Models of Artificial Roller Compacted Concrete Dam by Using FBG Sensor

Application of Optical Fiber Grating Sensor in Gravity Dam Structure Model Test

Design and application of a fiber Bragg grating strain sensor with enhanced sensitivity in the small-scale dam model

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Strain Monitoring By FBG Strain Sensor In a Small Scale Dam Model

Investigation Of Fiber Bragg Grating Strain Sensor In Dynamic Tests Of Small-Scale Dam Model

Cracking Monitoring by FBG Strain Sensor in the Small Scale Dam Model

Application of FBG strain sensors to experiments of artificial concrete dam models

Investigation on Seismic Damage Model Test of a High Concrete Gravity Dam Based on Application of FBG Strain Sensor.

Fiber Optic Monitoring of an Underground Excavation Model Text

Application of Fiber Bragg Grating Sensor in Geomechanical Model Test of Arch Dam

Study on Stress-Deformation Mechanism of Concrete Face Rockfill Dam Based on Centrifugal Model Test

Internal Deformation Monitoring for Centrifuge Slope Model with Embedded FBG Arrays

APPLICATION OF OPTICAL FIBER SENSING TECHNOLOGY TO SLOPE MODEL TEST

Derrick Stress Monitoring System Based On Fiber Bragg Grating Sensor Technology

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage