Abstract:Monitoring geotechnical structures and providing real-time early warning is a key measure to mitigate the impacts of disasters (slope slip, subsidence, dam deformation, bridge settlement, etc.). The fiber Bragg grating (FBG) flexible sensor, developed by the combination of flexible material and an FBG sensor, is widely used in geotechnical engineering health monitoring due to its excellent performance. The flexible sensor can perform regional and quasi-distributed measurements of the displacement field of the measured structure, and accurately reflect the operating state of the engineering structure. However, in practical engineering applications, factors such as the strain-transfer rate between the flexible substrate and sensing points, the displacement reconstruction algorithm, and the arrangement interval of the sensing points can cause measurement error, which, in turn, leads to a decrease in the displacement-measurement accuracy. In this paper, the following analysis is performed by means of theoretical derivation and model establishment. The influence of the length, width, and thickness of the cemented layer, the shear modulus of the flexible substrate, and the radius of the groove on the strain-transfer rate were analyzed, and the referential parameters were determined. The displacement reconstruction algorithm is essentially a recursive algorithm, which inevitably introduces cumulative error; the relationship between the layout interval of the sensing points and the measurement error is discussed. Considering the fabrication cost of the sensor and the allowable range of error, a sensing-point-layout interval of 100 mm was chosen. The feasibility and effectiveness of the simulation theory were verified by carrying out deformation-sensing experiments on the developed FBG flexible sensor. The research results can theoretically guide the packaging and fabrication of the FBG flexible sensor, thereby improving the measurement accuracy of the flexible sensor for the measured structure.

Fiber Optic Monitoring of an Underground Excavation Model Text

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

Fiber Optic Displacement Monitoring in Laboratory Physical Model Testing

FBG sensor based dynamic monitoring and analysis on sliding construction of a Prestressed Reticulated Shell-String structure

Monitoring Internal Displacements of a Model Dam Using FBG Sensing Bars

DEFORMATION MONITORING OF DAM MODEL TEST BY OPTICAL FIBER SENSORS

Monitoring of Tunnel Excavation Based on the Fiber Bragg Grating Sensing Technology

Safety monitoring of railway tunnel construction using FBG sensing technology

Feasibility Study of Anchored Fiber-Optic Strain-Sensing Arrays for Monitoring Soil Deformation Beneath Model Foundation

Application of Optical-Fiber Sensing to Concrete Support and Continuous Wall Strain Monitoring

Fiber Bragg grating test system and model tests based on geotechnical centrifuge

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage

Development and Application of an Optical Fiber Sensor Based In-Place Inclinometer for Geotechnical Monitoring

Application Of Fiber Bragg Grating Displacement Sensors To Geotechnical Model Test Of Underground Salt Rock Gas Storages

Experiments on an Offshore Platform Model by Fbg Sensors

Ground Movement Monitoring Using an Optic Fiber Bragg Grating Sensored System

Fiber Bragg Grating Displacement Sensor Based on Synchronous Deformation Sensing for Real-Time Monitoring of a Tunnel Lining.

Measurement-Error Analysis of Fiber Bragg Grating Flexible Sensor for Displacement-Field Monitoring of Geotechnical Engineering

Developing of Micro FBG Displacement Sensor and Its Application to Model Experiment

Application of FBG sensors in rolled concrete dam model

Experimental Study on Models of Artificial Roller Compacted Concrete Dam by Using FBG Sensor