Abstract:In the past few years, fiber optic sensing technologies have played an increasingly important role in the health monitoring of civil infrastructures. These innovative sensing technologies have recently been successfully applied to the performance monitoring of a series of geotechnical structures. Fiber optic sensors have shown many unique advantages in comparison with conventional sensors, including immunity to electrical noise, higher precision and improved durability and embedding capabilities; fiber optic sensors are also smaller in size and lighter in weight. In order to explore the mechanism of seepage-induced slope instability, a small-scale 1 g model test of the soil slope has been performed in the laboratory. During the model's construction, specially fabricated sensing fibers containing nine fiber Bragg grating (FBG) strain sensors connected in a series were horizontally and vertically embedded into the soil mass. The surcharge load was applied on the slope crest, and the groundwater level inside of the slope was subsequently varied using two water chambers installed besides the slope model. The fiber optic sensing data of the vertical and horizontal strains within the slope model were automatically recorded by an FBG interrogator and a computer during the test. The test results are presented and interpreted in detail. It is found that the gradually accumulated deformation of the slope model subjected to seepage can be accurately captured by the quasi-distributed FBG strain sensors. The test results also demonstrate that the slope stability is significantly affected by ground water seepage, which fits well with the results that were calculated using finite element and limit equilibrium methods. The relationship between the strain measurements and the safety factors is further analyzed, together with a discussion on the residual strains. The performance evaluation of a soil slope using fiber optic strain sensors is proved to be a potentially effective approach.

Development and Application of an Optical Fiber Sensor Based In-Place Inclinometer for Geotechnical Monitoring

Monitoring of Lateral Displacements of a Slope Using a Series of Special Fibre Bragg Grating-Based In-Place Inclinometers

Development of novel optical fiber sensors for measuring tilts and displacements of geotechnical structures

APPLICATION OF FBG SENSOR TO INTERNAL DISPLACEMENT MONITORING OF SURROUDING ROCK

In-situ Monitoring of Displacements and Stability Evaluation of Slope Based on Fiber Bragg Grating Sensing Technology

Theoretical and Experimental Study on the Fiber Bragg Grating-Based Inclinometer for Slope Displacement Monitoring

Implementation of a fibre optic monitoring system in a roadside slope in Hong Kong

Experimental Study on a New FBG-based and Terfenol-D Inclinometer for Slope Displacement Monitoring

An Optical Fibre Monitoring System for Evaluating the Performance of a Soil Nailed Slope

Introduction to an FBG-based inclinometer and its application to landslide monitoring

Monitoring of Tunnel Excavation Based on the Fiber Bragg Grating Sensing Technology

Health monitoring of foundations using fiber Bragg grating sensing technology

Fiber optic based monitoring technologies of slope engineering

Fiber Bragg Grating Inclinometer-enabled IoT Sensing System with Low Power Consumption and Small Size

Monitoring and Warning of Landslides and Debris Flows Using an Optical Fiber Sensor Technology

Ground Movement Monitoring Using an Optic Fiber Bragg Grating Sensored System

Development of a Novel Inclinometer by Inverse Finite Element Method for Soil Deformation Monitoring

Fiber Optic Monitoring of an Underground Excavation Model Text

Fiber Bragg Grating-Based Performance Monitoring of A Slope Model Subjected to Seepage

An Fiber Bragg Grating-Based Monitoring System for Slope Deformation Studies in Geotechnical Centrifuges.

Development of OFDR-based Inclination Sensor for Deformation Measurement of Foundation Pile