Abstract:This paper first briefly reviews the modified effective length method in the literature for design of steel columns considering the inter-column interaction with the limitations outlined To overcome these. limitations, a new storey-buckling approach for steel frames is presented, where each storey is treated as a whole at the sway buckling, and its resistance is evaluated using the presented storey-buckling factor, which can be obtained from the defined storey slenderness using the relationships illustrated by the column curves in current codes. In total, 30 frame examples, considering the effects of storey number, the span number and the configuration of axial forces in columns, are adopted to examine the proposed method. Comparisons between FE results show that the presented method has good performances in predicting the failure load of considered frames. In FE analysis, the geometric and material nonlinearities as well as two types of geometric imperfections and longitudinal residual stresses are considered. Predictions from the notional load approach are also compared with FE results for some cases which, shows that these predictions may underestimate or overestimate the failure load of certain frames. The interaction between the sway buckling of the whole storey and the non-sway buckling of the weakest column may reduce the failure load of steel frames. In this Study, a reduction factor is presented to consider this mode interaction, and comparisons with FE results show that this method can reasonably assess the adverse effects of this mode interaction. (C) 2008 Elsevier Ltd. All rights reserved.

Buckling Loads of Variable Stiffness Columns Loaded by Top Load and Linearly and Parabolically Distributed Loading

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

Column-to-column Interaction in Buckling of Frames

Inelastic Storey-Buckling Factor of Steel Frames

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

An Analytic Approach For Exactly Determining Critical Loads Of Buckling Of Nonuniform Columns

Buckling Analysis of Nonuniform and Axially Graded Columns with Varying Flexural Rigidity

Buckling of Standing Tapered Timoshenko Columns with Varying Flexural Rigidity under Combined Loadings

Stability analysis of composite columns and parameter optimization against buckling

Critical Load for Buckling of Non-Prismatic Columns under Self-Weight and Tip Force

Analysis of initially crooked, end restrained steel columns

Stability of Sway-Inhibited Prismatic Columns Subjected to Internal Axial Loads

An Interactive Buckling Theory for Built-Up Beam-Columns and Its Application to Centrally Compressed Built-Up Members

Static and dynamic interactive buckling of isotropic thin-walled closed columns with variable thickness

Effects of Engesser's and Haringx's Hypotheses on Buckling of Timoshenko and Higher-Order Shear-Deformable Columns

STUDY ON STABILITY OF VARIABLE CROSS-SECTION BOX COLUMN

Series Solution of Large Deformation of a Beam with Arbitrary Variable Cross Section under an Axial Load

Stability Analysis of Eccentrically Loaded Wood Beam-Columns

Critical Buckling Loads of the Perfect Hollomon's Power-law Columns

Buckling Load of Tapered Fibers Subjected to Axially Distributed Load

Effect of Internal Axial Loads on the Stability of Sway-Permitted Prismatic Columns