Abstract:Planar steel plates have many advantages, including high precision, flexible outline shape fabrication, and convenient transportation and storage, which make them suitable for various steel structures (e.g., reticulated shell structures). However, the steel plates are not commonly used as structural members, because they have a relatively low out-of-plane flexural stiffness. To improve the flexural buckling resistance, a novel type of built-up plate member comprising two longitudinal plates is proposed in this study. Additionally, the flexural buckling behavior of the novel built-up members is investigated. A series of compression tests on 42 specimens of built-up plate members is conducted to determine the elastic and ultimate critical loads. Flexural buckling about the minor axis is observed to be the failure mode of the specimens. The equivalent slenderness ratio method is used to determine the theoretical elastic critical loads of the specimens. With consideration of the measured material properties, geometric imperfections, and residual stresses of the specimens, a refined finite-element model is developed to simulate the flexural buckling behavior. Furthermore, the applicability of two representative specifications (American and European) to the novel built-up member is discussed. The results indicate that the design strengths calculated using these specifications are generally conservative for determining the ultimate loads of the built-up plate members. Design curve “c” in Eurocode 3 is found to be the most suitable among the specifications of interest for determining the design strength. This study provides valuable guidance for the design of built-up plate members.

Buckling loads of variable thickness thin isotropic plates

Buckling of Simply Supported Thin Plate with Variable Thickness under Bi-Axial Compression Using Perturbation Technique

Three-dimensional Elasticity Solutions for Bending of Generally Supported Thick Functionally Graded Plates

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Buckling of Rectangular Plates With General Variation in Thickness

Elastic stability of plate simply supported on four sides subjected to combined bending shear and patch loading

Exact solutions for variable-thickness inhomogeneous elastic plates under various boundary conditions

Static and dynamic interactive buckling of isotropic thin-walled closed columns with variable thickness

Approximate 3-Dimensional Analysis Of Rectangular Thick Laminated Plates - Bending, Vibration And Buckling

Buckling of the Axially Compressed Cylindrical Shells with Arbitrary Axisymmetric Thickness Variation

On the Solution to Pre- Buckling of a Thin Rectangular Plate Subjected to a Thick Strip in-plane Loading

Isogeometric nonlinear bending and buckling analysis of variable-thickness composite plate structures

Analytical Research on Dynamic Buckling of Thin Cylindrical Shells with Thickness Variation under Axial Pressure

Buckling of Cylindrical Shells with Arbitrary Circumferential Thickness Variations under External Pressure

Buckling of Symmetrical Cross-Ply Composite Rectangular Plates under a Linearly Varying In-Plane Load

Buckling Analysis of Laminated Plates with Asymmetric Layup by Approximation Method

Analytic Solution for Buckling Problem of Rectangular Thin Plates Supported by Four Corners with Four Edges Free Based on the Symplectic Superposition Method

A variational approach for analytical buckling solution of moderately thick microplate using strain gradient theory incorporating two-variable refined plate theory: a benchmark study

Buckling Analysis of Rectangular Plates with Variable Thickness Resting on Elastic Foundation

Buckling transition and boundary layer in non-Euclidean plates

Buckling Analysis of Laminated Composite Plate with Different Boundary Conditions using modified Fourier series