Abstract:This paper first briefly reviews the modified effective length method in the literature for design of steel columns considering the inter-column interaction with the limitations outlined To overcome these. limitations, a new storey-buckling approach for steel frames is presented, where each storey is treated as a whole at the sway buckling, and its resistance is evaluated using the presented storey-buckling factor, which can be obtained from the defined storey slenderness using the relationships illustrated by the column curves in current codes. In total, 30 frame examples, considering the effects of storey number, the span number and the configuration of axial forces in columns, are adopted to examine the proposed method. Comparisons between FE results show that the presented method has good performances in predicting the failure load of considered frames. In FE analysis, the geometric and material nonlinearities as well as two types of geometric imperfections and longitudinal residual stresses are considered. Predictions from the notional load approach are also compared with FE results for some cases which, shows that these predictions may underestimate or overestimate the failure load of certain frames. The interaction between the sway buckling of the whole storey and the non-sway buckling of the weakest column may reduce the failure load of steel frames. In this Study, a reduction factor is presented to consider this mode interaction, and comparisons with FE results show that this method can reasonably assess the adverse effects of this mode interaction. (C) 2008 Elsevier Ltd. All rights reserved.

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

Element stiffness matrix for Timoshenko beam with variable cross-section

The elastic buckling of frame columns considering the effect of the shear deformations

Column-to-column Interaction in Buckling of Frames

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Elastic flexural-torsional buckling of thin-walled cantilevers

Inelastic Storey-Buckling Factor of Steel Frames

THE EQUIVALENT NEGATIVE FLEXURAL STIFFNESS OF AXIAL FORCES IN SWAY-PROHIBITED COLUMNS

STABILITY OF DOUBLY SYMMETRIC I-SECTIONAL CANTILEVERS WITH DIFFERENT BOUNDARY CONDITIONS AT TIP

Member Moment Amplification Factors Due-to P-Δ Effect in Frames Braced by a Vertical Timoshenko's Cantilever

MOMENT AMPLIFICATION FACTORS OF CANTILEVERS WITH VARIABLE AXIAL FORCES AND SECTIONAL RIGIDITIES

Buckling of Frames Braced by Flexural Bracing

Critical load of frames with flexural-typed bracings and threshold stiffnesses for the bracings

ON STABILITY OF I-SECTION STEEL CANTILEVERS

Numerical Investigation and Design of Thin-Walled Complex Section Steel Columns

An Interactive Buckling Theory for Built-Up Beam-Columns and Its Application to Centrally Compressed Built-Up Members

Global Buckling Behavior of CFST Columns with Assembling Errors

Buckling Loads of Variable Stiffness Columns Loaded by Top Load and Linearly and Parabolically Distributed Loading

Global Stability Performance of Multi-Cellular T-Shaped CFST Slender Columns under Eccentric Compression

A Refined Finite Element Formulation for Flexural and Torsional Buckling of Beam–columns with Finite Rotations

The 3D finite element analysis of nonlinear buckling bearing capacities of CFT with high slenderness ratio under eccentric load