Abstract:The damage characteristics of RC frames in the Wenchuan earthquake,prevalent column hinges mechanism,imply that further research is necessary for the "strong column-weak beam" moment adjustment measures in China.Bi-directional horizontal seismic is one of the most important factors that affects the "strong column-weak beam" mechanism of RC frames,however,it has not been considered seriously in the known researches of the moment amplification factor of columns.For example,research results based on plane model indicated that ∑M_c=1.5∑M_b or ∑M_c=∑M_(bua) used to amplify the moment of the upper floors columns,while 1.5 used for that of the lower ends of first floor columns are optimized moment amplification measures.Based on the OpenSees framework,flexibility method based fiber model was adopted to simulate the nonlinear responses of columns under biaxial bending and varying axial force effectively,and the plastic hinge distributions of two six-stories 3D spatial reinforced concrete frames under rare earthquake were investigated.The results indicate that the plastic hinge distributions of two spatial frames under bi-directional horizontal seismic action are all worse than that of the corresponding plane frames.Spatial frame designed according to the ∑M_c=1.2∑M_b(1.25 for the moment amplification factor of the lower column ends of first floor) in the Chinese building code develops a typical column hinges mechanism under rare earthquake,while spatial frame designed according to optimized measure ∑M_c=1.5∑M_b(1.5 for the lower column ends of first floor) develops a column hinges dominated column-beam mixing hinges mechanism under rare earthquake.

Member Moment Amplification Factors Due-to P-Δ Effect in Frames Braced by a Vertical Timoshenko's Cantilever

MOMENT AMPLIFICATION FACTORS OF CANTILEVERS WITH VARIABLE AXIAL FORCES AND SECTIONAL RIGIDITIES

BUCKLING OF TOP-OUTRIGGER BRACED FRAME-TUBE STRUCTURES AND THE AMPLIFICATION FACTORS FOR DISPLACEMENT AND MOMENT

BUCKLING OF TIMOSHENKO COLUMNS WITH LINEARLY VARIED RIGIDITIES AND AXIAL FORCES

Lateral resistance of moment resisting-chevron braced frames with weak beams

Inelastic Storey-Buckling Factor of Steel Frames

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

The elastic buckling of frame columns considering the effect of the shear deformations

Element stiffness matrix for Timoshenko beam with variable cross-section

THE EFFECT OF MOMENT AMPLIFICATION FACTORS ON THE REALIZATION OF STRONG COLUMN-WEAK BEAM

Determining Experimental Ductile Behavior of Composite Walls Considering Second-Order Effects: A Case Study for Multi-Celled CFST Walls

Seismic Performance Evaluation on Composite Frame Structures with T-shaped Multi-Cellular CFST Columns

Analytic solution of second-order effect for frame structure

EFFECT OF MOMENT AMPLIFICATION FACTORS OF COLUMNS ON CONTROLLING PLASTIC HINGE MECHANISM OF RC FRAMES

Stiffness amplification coefficient for composite frame beams considering slab spatial composite effect

Practical approach of magnification factor of moment considering second-order effect of steel frame column

Effect of Amplification of Moments at the Bottom Section of Columns on Seismic Behavior of RC Frames

BUCKLING ANALYSIS OF FRAME CONSIDERING SHEAR DEFORMATION EFFECT

Influence of gusset plate connections on the secondary moments in beams and columns of braced frames

Strong column-weak beam mechanism for RC frames in China under bi-directional horizontal seismic excitation

Geometric stiffness matrix of thin-walled beam-column elements considering coupling effects