Abstract:The internal layout of the converter chassis in metro traction system is compact, and the electromagnetic couplings among power circuit, control circuit, and converter chassis are complicated. The electromagnetic interference (EMI) generated by the high-speed switching of power devices couples to the control circuit through the converter chassis, which may affect the safety and reliability of the system. In order to evaluate EMI performance at low-voltage power ports effectively, this article studies noise coupling mechanism on how common-mode (CM) EMI from the power circuit propagates to the low-voltage power cables through converter chassis. A multiterminal impedance network model of the converter chassis with an impedance matrix is built, and the parameters in the impedance matrix are extracted. The high-frequency models of coupling impedances between the converter chassis and different components are built, and the parameters of coupling impedances in the models are extracted. Based on these works, an estimation model of CM EMI coupling from power circuit to low-voltage power port through converter chassis is proposed. With the proposed model, the CM EMI at low-voltage power port is simulated. Different grounding schemes of the converter chassis are evaluated, and the optimal grounding position on the converter chassis is found. The simulated results are verified by experiment.

A General Analytical Model of Single-Layer Common-Mode Chokes

High Frequency Modeling for Common Mode Chokes Based on Impedance Measurement

An Analysis and Implementation of Common Mode Feedback in High-Speed Fully Differential Op-Amp

Simplified Analytical Model and Investigation of Open-Circuit AC Winding Loss of Permanent-Magnet Machines.

Study of High Frequency Characteristics Modeling and EMI Suppression of Common Mode Chokes

High Frequency Modeling of Common Mode Chokes for Electromagnetic Interference Analysis

Analytical Modeling and Analysis of Open-Circuit Magnet Loss in Surface-Mounted Permanent-Magnet Machines

Modeling And Measurement Of A Common-Mode Filter Based On The 3-D Transmission Line Structure

Analyzing and Characterizing Common Mode Chokes for Three Phase Systems

EMI Filter Design Based on High-Frequency Modeling of Common-mode Chokes

Modeling and Evaluation of Common-Mode EMI Coupling Through Converter Chassis in Metro Traction System

Elimination of Common-Mode Choke Saturation Caused by Self-Resonance of the EMI Filter in a Variable-Frequency Drive System

On the Evaluation of the Common-Mode Current along Twisted-Wire-Pairs

Finite-Element Modeling of Saturation Effect Excited by Differential-Mode Current in a Common-Mode Choke

Impedance Modeling of Common Mode Ferrite Chokes Using Transmission Line Theory

Modeling of Common-Mode Current in Motor Cable of Inverter-Fed Motor Drive System

Saturation Effect Analysis and Dynamic Inductance Calculation of Common Mode Choke

Winding Optimization for Reducing Parasitic Capacitances of Common-Mode Chokes

Modeling of Parasitic Inductive Couplings in a Pi-Shaped Common Mode EMI Filter

A Compact Meander Line-Resonator Hybrid Structure for Wideband Common-Mode Suppression

Analytical Model for Eddy Current Testing of Thickness of Multi-layered Structures and Experimental Verification