Abstract:Phase change materials (PCMs) exploit their cyclic phase change (solidification and melting) to enable latent heat storage. While incorporating them in thermally activated building systems can potentially enhance energy savings and thermal comfort, they can introduce significant challenges to the building energy management system. This work first reports the result of small-scale side-by-side experiments on two thermally active cuboids with and without BioPCMs at different supply water and PCM melting temperatures, as well as irradiance levels. Next, a dynamic model is developed in TRNSYS v18.05 for a typical design of an office space under hot desert climate conditions. The model is then integrated into a multi-objective optimization routine using NSGA-II algorithms to identify the optimal characteristic cooling curves, melting temperatures, and PCM thicknesses that simultaneously minimize energy consumption and maximize the percentage of comfortable hours. The experimental observations of the PCM-integrated cuboid highlighted energy savings between 80.45 and 84.56 %, compared to the reference cuboid, at nearly the same levels of indoor temperatures. The PCM panels reduced the cooling capacity of the radiant floor but also dampened air temperature variations by up to 83.17 %. Besides, higher solar irradiance levels, encountered in desert areas, were found to enhance the cooling capacity by up to 46.8 %. The Pareto solutions highlighted the possibility of achieving acceptable unmet hours of 3.16 % using PCMs and without the need for an assisting air system, compared to 14.1 % without PCMs. Besides, at the same unmet hours of the reference system, the PCMs reduced the total energy consumption and the peak cooling power by 9.75 and 41.2 %, which translates into substantial operation and capital investments, respectively. Moreover, the study demonstrated by example the importance of calibrating the commonly used cooling curves of thermally active buildings when planning for PCM integration.

Building envelope integrated phase change material under hot climate towards efficient energy and CO2 emssion saving

Adjustable Insulation for Enhancing the Performance of Phase Change Materials in Buildings

Incorporation of phase change materials into building envelope for thermal comfort and energy saving: A comprehensive analysis

Exploring the Potential of Phase Change Material for Thermal Energy Storage in Building Envelopes

Enhancing Energy Efficiency in Buildings through PCM Integration: A Study across Different Climatic Regions

Phase Change Materials Integrated Into the Building Envelope to Improve Energy Efficiency and Thermal Comfort

The Impact of Integrating Phase Change Material Upon Indoor Air Temperature in Hot Climates

Heat transfer reduction in buildings by embedding phase change material in multi-layer walls: Effects of repositioning, thermophysical properties and thickness of PCM

Enhancing thermal comfort in buildings through the integration of phase change material on the building envelope: a simulation study

A comparative evaluation on energy consumption of a building using bio-based and paraffin-based phase change materials integrated to external building envelope

Numerical analysis on phase change progress and thermal performance of different roofs integrated with phase change material (PCM) in Moroccan semi-arid and Mediterranean climates

Optimizing PCM Integrated Wall and Roof for Energy Saving in Building under Various Climatic Conditions of Mediterranean Region

Advanced building envelope by integrating phase change material into a double-pane window at various orientations

Energy management of residential buildings using innovative passive techniques

Evaluating the potential of optimized PCM-wallboards for reducing energy consumption and CO 2 emission in buildings

Thermal Analysis of Building Roofs with Latent Heat Storage for Reduction in Energy Consumption and CO2 Emissions: An Experimental and Numerical Research

Experimental study of the thermal and energy conservation characteristics of combined phase change material (PCM) room in summer

Energy Conservation of Residential Buildings in Extreme Climates with Phase Change Material-Aluminum Radiation Reflector Cool Roof

Experimental research on the use of phase change materials in perforated brick rooms for cooling storage

Optimizing the characteristic cooling curves of PCM-integrated thermally active buildings: Experimental and numerical investigations

A new approach for selecting and implementing phase change materials in Kuwaiti Buildings: Practical considerations