Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

A Novel Triple-Slope-Based Digital Measurement Platform for Three-Wire Connected Resistive Sensors

A Dynamic-Biased Resistor-Based CMOS Temperature Sensor with a Duty-Cycle-Modulated Output

Design and optimization of a new type of contactless radial C4D sensor

A Novel Electrical Resistance Tomography System Based on ${\rm{c}}^{4}{\rm D}$ Technique

A CMOS Temperature Sensor with Versatile Readout Scheme and High Accuracy for Multi-Sensor Systems

A Flexible Tactile Sensor Array Based On Pressure Conductive Rubber For Three-Axis Force And Slip Detection

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

Analysis of a Faster Digitizer for Tunneling Magneto-Resistance Angle Sensor Configured in Push-Pull Natured Two Half-Bridges

Non-Invasive Integrated Device for Multi-Core Cable Current Measurement Based on TMR Sensor Array

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

A Simple Digitizer for GMR-based Magnetic Field Sensor with Some Key Practical Considerations

A Simple Digital Readout Circuit for Differential Resistive or Capacitive Sensors

Three-Dimensional Finite Element Analysis of a Novel Silicon Based Tactile Sensor with Elastic Cover.

Oscillator-Less Direct-Digital Front-End Realizing Ratiometric Linearization Schemes for TMR-Based Angle Sensor

A Novel Multidimensional Tensile, Shear, and Buckling Sensor for the Measurement of Flexible Fibrous Materials

Two Proposals of a Simple Analog Conditioning Circuit for Remote Resistive Sensors with a Three-Wire Connection

A Power-Efficient Readout for Wheatstone-Bridge Sensors With COTS Components

An ultra-sensitive DeltaR/R measurement system for biochemical sensors using piezoresistive micro-cantilevers

A Reference-less Slope Detection Technique in 65nm for Robust Sensing of 1T1R Arrays

A 3.5MHz-BW 128nT<sub>rms</sub> Resolution TMR Readout Using Ping-Pong Auto-Zeroing and SAR-Assisted Offset Calibration for Contactless Current Sensing

A customizable, low-power, wireless, embedded sensing platform for resistive nanoscale sensors