Abstract:High-precision and power-efficient sensor interfaces have become increasingly ubiquitous as they form an integral part of multiple fast-growing sectors such as instrumentation control, medical devices, and agricultural automation. Much progress has been recently made in direct-digitization sensor readout circuits (DD-RO). By skipping the instrumentation amplifier (IA) and connecting the ADC directly to the sensor, this architecture reduces system-level complexity compared to conventional IA plus ADC solutions. However, several challenges must be considered. First, in the absence of an IA, it requires a high dynamic range (>90dB) ADC to process the cross-scale input signals and disturbances spanning from several μV to hundreds of mV while retaining excellent sensitivity and linearity, which would usually entail excessive power dissipation. Such demanding DR can be relaxed by a spectrum-shaping $\Delta-\Delta\Sigma$ ADC [1] (Fig. 1). However, $\Delta-\Delta\Sigma$ ADCs are better suited to the spectral characteristic of bioelectrical signals and disturbances (electrode offset, power-line interference, and motion artifact), whose amplitudes decrease approximately with frequency. Second, conventional ADCs typically exhibit finite input impedance that hampers their direct interaction to high-impedance sensors due to the deterioration of total common-mode rejection ratio (T-CMRR) and gain accuracy. Prior art DD-ROs rely on a positive feedback loop (PFL) [2] or pre-charging buffers [3] for impedance boosting, but the former requires dedicated manual calibration while the latter suffers from additional noise, power, and area overhead. Alternatively, a $\Delta\Sigma$ ADC employing the $\mathrm{G}_{\mathrm{m}}-\mathrm{C}$ integrator provides high input impedance (Fig. 1 bottom left), and $\mathrm{G}_{\mathrm{m}}$ can be linearized by degeneration [2], [4]–[6] or fully differential transconductors embedded in current feedback [7] [8] (Fig. 1 bottom right). However, $\mathrm{G}_{\mathrm{m}}$ often dissipates more power to accommodate out-of-range input signals while retaining linearity.

A Simple Digitizer for GMR-based Magnetic Field Sensor with Some Key Practical Considerations

A Broadband NMR Magnetometer System with Field Searching and Automatic Tuning Function

Design of CMOS magnetic sensor integrated circuit

Analysis of a Faster Digitizer for Tunneling Magneto-Resistance Angle Sensor Configured in Push-Pull Natured Two Half-Bridges

Integrated Giant Magnetoresistance Technology for Approachable Weak Biomagnetic Signal Detections

Design of GMR-based Contactless Displacement Detecting System with Long Dynamic Range

Study of ultra-miniature giant magneto resistance sensor system based on 3D static magnetic analysis technique

Performance Evaluation of Dual-Slope Digitizer for Self-Heating Compensation in Resistive Sensor

Development of a Compliant Magnetic 3-D Tactile Sensor with AMR Elements.

Several New Types of Giant Magnetoimpedance Sensor

A High Sensitivity Digital Giant Magneto-Impedance (GMI) sensor for Magnetic Communication

Design and realization of feedback-type giant magneto-impedance micro-magnetic sensor

GMI Measurement System Based on Virtual Instrument Technology

Design Methodology for Magnetic Field-Based Soft Tri-Axis Tactile Sensors

Low Field Optimization of a Non-Contacting High-Sensitivity GMR-Based DC/AC Current Sensor

Ultrathin All-in-One Spin Hall Magnetic Sensor with Built-In AC Excitation Enabled by Spin Current

Giant Magnetoresistance Biosensors in Biomedical Applications

A 103.6Db-Sndr 760Mvpp-Input-range 7.8Gω-Input-impedance Direct-Digitization Sensor Readout with Pseudo-Differential Transconductors and Dummy DAC

Analysis and optimization of GMR based current sensors with identical pinning orientation

Investigation of Magnetic Field Sensor Base on GMR Nano-Thin-Film

Differential-type GMI magnetic sensor based on longitudinal excitation