Abstract:In this study, a series of hypervelocity impact tests were carried out based on a two-stage light gas gun, and the sequence spectrum and radiation evolution data of the impact products under different impact conditions were obtained. The diameter of the projectile is 3–5 mm, the impact velocity is 3.13–6.58 km/s, and the chamber pressure is 0.56–990 Pa. The spectrum of ejected debris cloud in the 250–310 nm band were obtained using a transient spectral measurement system and a multi-channel radiometer measurement system. The test results reveal that the flash radiation intensity increases as a power function with the kinetic energy of the impact. Furthermore, the peak value of the line spectrum decreases as the chamber vacuum degree increases, while the radiation width gradually expands. The line spectrum in the spectral characterization curve corresponds to the ejected debris clouds splitting phase, which does not produce significant line spectrum during material fragmentation and is dominated by the continuum spectrum produced by blackbody radiation. There will appear one or three characteristic peaks in the flash radiation time curve, the first and second peaks correspond to the penetration phase and the third peak corresponds to the expansion phase of the ejected debris clouds on the time scale, the first and second peaks are more sensitive to the chamber vacuum degree, and when the pressure is higher than 99 Pa, the first and second characteristic peaks will disappear. The radiant heat attenuation of the flash under different impact conditions is significantly different, the attenuation exponent has a power function relationship with the impact velocity and the chamber vacuum degree, while the attenuation exponent has a linear relationship with the diameter of the projectile, the specific expression of the attenuation exponent is obtained by fitting. The findings from this research can serve as a valuable reference for remote diagnostic technologies based on flash radiation characteristics.

Flash X-ray radiography of internal damage in soft cellular materials during instrumented dynamic penetration

Dynamic penetration of cellular solids: Experimental investigation using Hopkinson bar and computed tomography

High-speed X-ray radiography for experiments in impact dynamics using high-power X-ray tube, cesium iodine scintillator and laboratory optical camera

High-energy X-ray Radiography of Laser Shock Loaded Metal Dynamic Fragmentation Using High-Intensity Short-Pulse Laser.

An Internal Digital Image Correlation Technique for High-Strain Rate Dynamic Experiments

In Situ Characterization of Hot Cracking Using Dynamic X-Ray Radiography

A Technique for In-Situ Displacement and Strain Measurement with Laboratory-Scale X-Ray Computed Tomography

Experimental investigation of spectral evolution in flash radiation by hypervelocity impact on aluminum plates

In-situ X-ray Microscopy of Crack-Propagation to Study Fracture Mechanics of On-Chip Interconnect Structures

Thermomechanical response of thickly tamped targets and diamond anvil cells under pulsed hard x-ray irradiation

Observation of Damage Initiation for Trans-laminar Fracture Using in situ Fast Synchrotron X-ray Radiography and ex situ X-ray Computed Tomography

Unintended consequences: Assessing thermo-mechanical changes in vinyl nitrile foam due to micro-computed X-ray tomographic imaging

Inhomogeneous plastic flow investigated by X-ray absorption microtomography of an aluminium alloy containing marker particles

Dosimetric characterization of a rotating anode x-ray tube for FLASH radiotherapy research

Damage kinetics and compression behavior of Al alloy foam using in situ SRμCT

Hypersonic impact flash characteristics of a long-rod projectile collision with a thin plate target

Full-Field Quantitative Visualization of Shock-Driven Pore Collapse and Failure Modes in PMMA

Quantifying motion blur by imaging shock front propagation with broadband and narrowband X-ray sources

Classification of Cracks in Composite Structures Subjected to Low-Velocity Impact Using Distribution-Based Segmentation and Wavelet Analysis of X-ray Tomograms

Dynamic impact testing of cellular solids and lattice structures: Application of two-sided direct impact Hopkinson bar

Roentgenoscopy of laser‐induced projectile impact testing