Abstract:The present study intends to evaluate the ratcheting of U75VG rail steel samples tested at different stress levels and various temperatures through a combined isotropic–kinematic hardening rule. Through the Lee–Zavrel (L–Z) isotropic description, the actual yield surface was determined by the superposition of the initial yield surface and the isotropic hardening variable. The saturated yield surface was then translated through the Ahmadzadeh–Varvani (A–V) kinematic hardening rule as the loading excursion exceeded the elastic limit. Ratcheting data in the rail steel samples demonstrated a negative strain-rate sensitivity when the operating temperature ranged between 573 and 873 K, at which dislocations and solute atoms are believed to interact with each other improving the strength of materials. Within this temperature range, referred to as the dynamic strain aging (DSA) temperature domain, materials showed no noticeable increase in ratcheting magnitude over the asymmetric loading cycles. The influence of operating temperature on the ratcheting of steel samples was introduced through an exponential function into the dynamic recovery of the hardening framework. Within the DSA temperature domain, the exponential function formed a plateau with a value as low as = 0.3. A drop in function at the DSA temperature domain directly influenced the magnitude of backstress increments and the translation of the yield surfaces. At the operating temperatures beyond the DSA domain, the yield strength noticeably declined resulting in materials softening. The predicted ratcheting curves and those measured data at the DSA temperature domain were found in close agreement.

Ratcheting Assessment of Rail Steel at Elevated Temperatures in the Presence of Dynamic Strain Aging

Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: Experiments and simulations

An Investigation of the Effect of High-Temperature Cyclic Straining and Creep Loading on Tensile Mechanical Properties of GH4145/SQ Alloy

A cyclic visco-plastic constitutive model for the ratcheting behavior of U75VG rail steel under a wide range of loading rates

Temperature-dependent cyclic plastic deformation of U75VG rail steel: Experiments and simulations

Uniaxial and non-proportionally multiaxial ratcheting of U71Mn rail steel: experiments and simulations

Strain Cyclic Characteristics and Ratchetting Behaviors of High-Speed Railway Train Axle Steel EA4T

Ratcheting assessment of low yield point steel BLY160: Experimental analysis and constitutive modelling

Thermal Aging Effect on the Ratcheting-Fatigue Behavior of Z2CND18.12N Stainless Steel

Ratcheting deformation behavior of 316LN stainless steel under thermomechanical and isothermal loadings

Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures

Thermal ratchetting deformation of a 316L stainless steel cylindrical structure under an axial moving temperature distribution

Dynamic mechanical behaviors of pearlitic U71MnG rail steel: Deformation mechanisms and constitutive model

Material Behavior Description for a Large Range of Strain Rates from Low to High Temperatures: Application to High Strength Steel

Analysis of hardening mechanisms of rail steel under plastic deformation by uniaxial compression

The effect of strain hardening on shakedown limits of a pearlitic rail steel

The effect of microstructure evolution on the ratchetting-fatigue interaction of carbide-free bainite rail steels under different heat-treatment conditions

Dynamic Mechanical Behavior at Elevated Temperatures and High Strain Rates of Low Yield Point Steels

High-Temperature Low-Cycle Fatigue Behavior of HS80H Ferritic–Martensitic Steel Under Dynamic Strain Aging

Evaluation of Mechanisms for Strengthening of Surface Layers of Long Rails in Different Directions Under Continuous Operation

Ratcheting led surface failure of medium carbon bainitic steel under mild operation conditions