Abstract:The uniaxial and non-proportionally multiaxial ratcheting behaviors of cyclic hardening materials at room and elevated temperatures were studied by experiments first. As an auxiliary experiment to reveal the cyclic hardening/softening feature of the material and determine the material parameters used in the developed model, the material was also tested under a uniaxial and a non-proportionally multiaxial strain cycling. Simultaneously, the effects of different loading conditions at certain temperature on the strain cyclic deformation and ratcheting were analyzed. It is shown by experiments that, the strain cyclic deformation and ratcheting behavior of the material have a great dependence on the ambient temperatures, especially to a specific range of 400–600°C, i.e., the material exhibits a markedly dynamic stain aging so that a higher cyclic hardening and lower ratcheting are resulted in, as comparing with the results at other temperatures. Then, based on the aforementioned experimental results, the temperature-dependent ratcheting of the material was simulated by constructing a new visco-plastic constitutive model. In the developed model, the Ohno–Abdel-Karim kinematic hardening model [Ohno, N., Abdel-Karim, M., 2000. Uniaxial ratcheting of 316FR steel at room temperature: II. Constitutive modeling and simulation. ASME J. Eng. Mater. Technol. 122 (1), 35–41] was extended to simulate the temperature-dependence of ratcheting behavior reasonably by introducing some temperature-dependent terms. It is shown that the simulated results agree with the corresponding experimental results well.

Thermal Aging Effect on the Ratcheting-Fatigue Behavior of Z2CND18.12N Stainless Steel

Effect of N on the Precipitation Behaviours of the Reduced Activation Ferritic/martensitic Steel CLF-1 after Thermal Ageing

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Ratcheting deformation behavior of 316LN stainless steel under thermomechanical and isothermal loadings

Fatigue life modeling for a low alloy steel after long-term thermal aging

Investigation of thermal aging damage mechanism of the Cast Duplex Stainless Steel

Thermal aging effect on Z3CN20.09M Cast Duplex Stainless Steel

The Microstructure and Mechanical and Corrosion Behaviors of Thermally Aged Z3CN20-09M Cast Stainless Steel for Primary Coolant Pipes of Nuclear Power Plants

Ratcheting-fatigue Behavior and Life Prediction of Z2CN18.10 Austenitic Stainless Steel Elbow

Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel

Thermomechanical fatigue properties and microstructural damage of nitrogen alloyed 316LN stainless steel

Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: Experiments and simulations

Mechanism of Fatigue-Life Extension Due to Dynamic Strain Aging in Low-Carbon Steel at High Temperature

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

Mechanical Behavior and Fatigue Performance of Austenitic Stainless Steel under Consideration of Martensitic Phase Transformation

Effect of long-term aging on the low cycle fatigue behavior and microstructure of a 10% Cr martensitic steel with low nitrogen and high boron contents at 650 °C

Effects of defect size and location on high cycle fatigue life of a maraging stainless steel at ambient and cryogenic temperatures

Probing the Fatigue Enhancement in a Thermally Aged Cast Duplex Stainless Steel by in Situ Neutron Diffraction

Experimental study on temperature-dependent ratchetting-fatigue interaction of extruded AZ31 magnesium alloy

Effect of Aging on Martensitic Transformation and Superelasticity of TiNiCr Shape Memory Alloy

High-Temperature Low-Cycle Fatigue Behavior of HS80H Ferritic–Martensitic Steel Under Dynamic Strain Aging