Abstract:In this study, the multi-stage heat treatment involving quenching (Q), lamellarizing (L), cryogenic (C) and tempering (T) is applied in marine 10Ni5CrMoV steel to study the microstructure and mechanical properties by multi-scale characterizations. Strengthening mechanism, strain hardening behavior and cryogenic toughening mechanism are further investigated. The results indicate that cryogenic treatment induces lattice distortion in martensite, resulting in significant internal stress. This process leads to the shrinkage of the laths, thereby reducing the equivalent grain size of the specimen. The combined cryogenic and tempering process induces continuous martensitic transformation, resulting in a reduction of the austenite volume fraction and dislocation density. The strong internal stress accelerates the movement of defects (dislocations) to grain boundaries. It promotes the precipitation of numerous alloy elements in the form of carbides at these defects, causing a significant decrease in solution strengthening. This is the primary reason why the yield strength of the QLCT specimen is reduced from 889.5 ± 7.8 MPa to 838.5 ± 7.4 MPa compared to the QLT specimen. The QLCT specimen exhibits a single stage strain hardening behavior during plastic deformation and possesses strong strain hardening ability and good machinability. This is attributed to the interaction between fine precipitates and dislocations. During the cryogenic impact process, secondary lattice distortion occurs in the QLCT specimen, further refining the precipitates. This enhances the pinning effect on grain boundaries and dislocations, improving the ability to hinder crack propagation. Consequently, the impact energy of the QLCT specimen increases from 264.3 ± 6.4 J to 278.7 ± 6.3 J at -84 °C, compared to the QLT specimen. Graphical

Effects of defect size and location on high cycle fatigue life of a maraging stainless steel at ambient and cryogenic temperatures

Effects of low-cycle fatigue on static mechanical properties, microstructures and fracture behavior of 304 stainless steel

Effect of cyclic straining at elevated-temperature on static mechanical properties, microstructures and fracture behavior of nickel-based superalloy GH4145/SQ

Improved Ultra-Low Cycle Fatigue Fracture Models for Structural Steels Considering the Dependence of Cyclic Damage Degradation Parameters on Stress Triaxiality

Effects of local microstructure on crack initiation in super martensitic stainless steel under very-high-cycle fatigue

Low Cycle Fatigue and Creep Fatigue Interaction Behavior of 9Cr-0.5Mo-1.8w-v-nb Heat-Resistant Steel at High Temperature

Effects of microstructure on crack initiation in super martensitic stainless steel under very‐high‐cycle fatigue at elevated temperature

Bending Fatigue Behavior of 316L Stainless Steel up to Very High Cycle Fatigue Regime

Determination of relationship between high-temperature low cycle fatigue damage and mechanical property degradation: Experimental and theoretical analyses

Effects of temperature and strain amplitude on low-cycle fatigue behavior of 12Cr13 martensitic stainless steel

Effect of aging temperature on the austenite reversion and mechanical properties of a Fe–10Cr–10Ni cryogenic maraging steel

The Low-Cycle Fatigue Behavior, Microstructure Evolution, and Life Prediction of SS304: Influence of Temperature

Tailoring the Microstructure to Enhance the Cryogenic Mechanical Properties of a Fe–34.5mn–0.04c Steel

Fatigue cracking behavior and life assessment of TC11 titanium alloy in very high cycle regime at two working temperatures

Effect of aging temperature on the heterogeneous microstructure and mechanical properties of a 12Cr–10Ni–Mo–Ti maraging steel for cryogenic applications

Statistical analysis of the effect of micro-defect size on the low cyclic fatigue and creep fatigue response of 316FR stainless steel using crystal plasticity finite element method

A comparative study of low cycle fatigue behavior and microstructure of Cr-based steel at room and high temperatures

Cyclic deformation mechanism and fracture behaviour of 316L stainless steel under thermomechanical fatigue loading

Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel

Towards a general damage law for interior micro-defect induced fatigue cracking in martensitic steels

Effect of Stress Ratio on Very High Cycle Fatigue Properties of Ti-10V-2Fe-3Al Alloy with Duplex Microstructure