Abstract:The main purpose of this study is to determine, via a three dimensions Finite Element analysis (FE), the stress and strain fields at the inner surface of a tubular specimen submitted to thermo-mechanical fatigue. To investigate the surface finish effect on fatigue behaviour at this inner surface, mechanical tests were carried out on real size tubular specimens under various thermal loadings. X ray measurements, Transmission Electron Microscopy observations and micro-hardness tests performed at and under the inner surface of the specimen before testing, revealed residual internal stresses and a large dislocation microstructure gradient in correlation with hardening gradients due to machining. A memory effect, bound to the pre-hardening gradient, was introduced into an elasto-visco-plastic model in order to determine the stress and strain fields at the inner surface. The temperature evolution on the inner surface of the tubular specimen was first computed via a thermo-elastic model and then used for our thermo-mechanical simulations. Identification of the thermo-mechanical model parameters was based on the experimental stabilized cyclic tension-compression tests performed at 20^{\circ}C and 300^{\circ}C. A good agreement was obtained between numerical stabilized traction-compression cycle curves (with and without pre-straining) and experimental ones. This 3 dimensional simulation gave access to the evolution of the axial and tangential internal stresses and local strains during the tests. Numerical results showed: a decreasing of the tangential stress and stabilization after 40 cycles, whereas the axial stress showed weaker decreasing with the number of cycles. The results also pointed out a ratcheting and a slightly non proportional loading at the inner surface. The computed mean stress and strain values of the stabilized cycle being far from the initial ones, they could be used to get the safety margins of standard design related to fatigue, as well as to get accurate loading conditions needed for the use of more advanced fatigue analysis and criteria.

Thermal ratchetting deformation of a 316L stainless steel cylindrical structure under an axial moving temperature distribution

Research on the thermal plasticity of the 18Mn-18Cr-0.77N-2Mo high nitrogen austenitic stainless steel

Ratcheting deformation behavior of 316LN stainless steel under thermomechanical and isothermal loadings

Uniaxial Ratcheting Behavior and Molecular Dynamics Simulation Evaluation of 316LN Stainless Steel

Dynamic Strain Aging-Mediated Temperature Dependence of Ratcheting Behavior in a 316LN Austenitic Stainless Steel

Non-proportionally multiaxial ratcheting of cyclic hardening materials at elevated temperatures: Experiments and simulations

Uniaxial Ratcheting Behavior and Microstructure Evolution of 316H Stainless Steel under the Random Cyclic Loads

Constitutive Model for Time-Dependent Ratchetting of Ss304 Stainless Steel: Simulation and Its Finite Element Analysis

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

Machine Learning Informed Visco-Plastic Model for the Cyclic Relaxation of 316H Stainless Steel at 550 C

Experimental study on uniaxial and nonproportionally multiaxial ratcheting of SS304 stainless steel at room and high temperatures

Microstructure evolution and dynamic recrystallization mechanisms of 316L stainless steel during hot deformation

Influence of build direction on the ratchetting-fatigue interaction of heat-treated additively manufactured 316L stainless steel

Uniaxial and non-proportionally multiaxial ratcheting of SS304 stainless steel at room temperature: experiments and simulations

Analysis of the temperature evolution in cyclic loading using the thermoelastic effect with plastic deformation

Experimental Study on Evolution of Kinematic Hardening for Stainless Steel 304 under Uni-axial Strain Ratcheting Deformation

The Whole-Life Ratcheting Behavior of Internal Pressurized Elbow Subjected to Force and Displacement Cycling with a Damage-Coupled Kinematic Hardening Model

Ratcheting Assessment of Rail Steel at Elevated Temperatures in the Presence of Dynamic Strain Aging

Thermal Aging Effect on the Ratcheting-Fatigue Behavior of Z2CND18.12N Stainless Steel

Thermo-mechanical FE model with memory effect for 304L austenitic stainless steel presenting microstructure gradient

Reliability analysis of stainless steel/carbon steel double-layered tube on the basis of thermal deformation behavior