Abstract:The mechanical properties of shale are generally influenced by in situ geological conditions. However, the understanding of the effects of in situ geological conditions on the mechanical properties of shale is still immature. To address this problem, this paper provides insight into the elasticity and characteristic stress thresholds (i.e., the crack closure stress σcc, crack initiation stress σci, and crack damage stress σcd) of shales with differently oriented bedding planes under deep in situ geological conditions. To accurately determine the elastic parameters and crack closure and initiation thresholds, a new method-i.e., the bidirectional iterative approximation (BIA) method-which iteratively approaches the upper and lower limit stresses of the linear elastic stress-strain regime, was proposed. Several triaxial compression experiments were performed on Longmaxi shale samples under coupled in situ stress and temperature conditions reflecting depths of 2000 and 4000 m in the study area. The results showed that the peak deviatoric stress (σp) of shale samples with the same bedding plane orientation increases as depth increases from 2000 m to 4000 m. In addition, the elastic modulus of the shale studied is more influenced by bedding plane orientation than by burial depth. However, the Poisson's ratios of the studied shale samples are very similar, indicating that for the studied depth conditions, the Poisson's ratio is not influenced by the geological conditions and bedding plane orientation. For the shale samples with the two typical bedding plane orientations tested (i.e., perpendicular and parallel to the axial loading direction) under 2000 and 4000 m geological conditions, the ratio of crack closure stress to peak deviatoric stress (σcc/σp) ranges from 24.83% to 25.16%, and the ratio of crack initiation stress to peak deviatoric stress (σci/σp) ranges from 34.78% to 38.23%, indicating that the σcc/σp and σci/σp ratios do not change much, and are less affected by the bedding plane orientation and depth conditions studied. Furthermore, as the in situ depth increases from 2000 m to 4000 m, the increase in σcd is significantly greater than that of σcc and σci, indicating that σcd is more sensitive to changes in depth, and that the increase in depth has an obvious inhibitory effect on crack extension. The expected experimental results will provide the background for further constitutive modeling and numerical analysis of the shale gas reservoirs.

Anisotropic properties of shale and its impact on underground structures: an experimental and numerical simulation

Experimental research on anisotropic properties of shale

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment

Investigation of the anisotropic mechanical response of layered shales

3D anisotropic microcracking mechanisms of shale subjected to direct shear loading: A numerical insight

Effect of Microstructure Heterogeneity on Shale Strength: Insights from Micro-CT Imaging and Numerical Simulations

Investigation on Mechanical Properties, AE Characteristics, and Failure Modes of Longmaxi Formation Shale in Changning, Sichuan Basin, China

Experimental and Numerical Study of the Effects of Layer Orientation on the Mechanical Behavior of Shale

Behavior of transversely isotropic shale observed in triaxial tests and Brazilian disc tests

Anisotropic failure behaviour and breakdown pressure interpretation of hydraulic fracturing experiments on shale

Numerical simulations on compression behaviors of the laminated shale based on the digital image technology and the discrete element method

Influences of foliation orientation and lateral stress difference on the deformation and fracturing of a thin-layered rock around underground excavations: insight from multi-axial loading tests

Experiment Study on Damage Properties and Acoustic Emission Characteristics of Layered Shale under Uniaxial Compression

Mechanical properties and numerical simulation analysis on large deformation of Jiangluling Carbonaceous Shale Tunnel

Experimental study on anisotropic properties of Longmaxi formation shale under uniaxial compression

A multiscale framework for the simulation of the anisotropic mechanical behavior of shale

Anisotropic Characterization of Mechanical Behavior and Fracture Morphology in Marine and Continental Shales under Uniaxial Compression: A Comparative Analysis

Elasticity and Characteristic Stress Thresholds of Shale under Deep In Situ Geological Conditions

Study of the Dynamic Failure Characteristics of Anisotropic Shales under Impact Brazilian Splitting

Unloading Behaviors of Shale under the Effects of Water Through Experimental and Numerical Approaches

Multiscale Laboratory Study and Numerical Analysis of Water-Weakening Effect on Shale