Abstract:High temperatures (120~238°C) from deep burial of shale affects strongly the eventual extractions of shale gas. Different from rocks at normal temperatures, the mechanical properties of shale change significantly at high-temperature of deep reservoirs, where its thermoplastic behavior needs further investigation. In this study, we propose a thermoplastic constitutive model for shale, incorporating temperature-dependent Drucker-Prager hardening rule, thermal loading/unloading criteria, and completely coupled stress-strain-temperature relation. The thermoplastic properties in the proposed model are obtained by further processing of published thermo-mechanical test data done on Tournemire shale by Masri et al. with the following key findings: (1) The hydrostatic-pressure-dependent (HPD) and stress-deviator-dependent (SDD) initial/critical yield parameters are found to be quadratically and linearly dependent on temperatures. (2) In the range of 20~250°C, the HPD and SDD hardening parameters vary linearly and quadratically with internal variables κ1 and κ2, respectively. All three coefficients in the correlative equations between hardening parameters and internal variables depend linearly on temperatures. (3) The temperature sensitivity modulus, as a function of hydrostatic pressure, hardening parameters, and initial temperature, is used for characterizing the contraction or expansion of the yield surface with temperatures. This proposed model was validated with thermo-mechanical measurements of Tournemire shale, fitting well with experiment data (correlation coefficient: 93%). During the plastic loading, temperature-sensitive modulus was found to be positively corresponding to the expansion of the yield surface with temperatures, and the SDD loading/unloading discriminant coefficient is positive. The proposed model may be applicable to other rock materials.

Experimental and constitutive modeling of the anisotropic mechanical properties of shale subjected to thermal treatment

A multiscale framework for the simulation of the anisotropic mechanical behavior of shale

Modeling Temperature-Dependent Behavior of Soft Clay

Experimental Investigation on the Effects of Thermal Treatment on the Physical and Mechanical Properties of Shale

Experimental Investigation of the Tensile Behavior and Acoustic Emission Characteristics of Anisotropic Shale under Geothermal Environment

Thermal Effects on Mechanical and Failure Behaviors of Anisotropic Shale Subjected to Direct Shear

Thermoplastic constitutive modeling of shale based on temperature-dependent Drucker-Prager plasticity

An experimental study on mechanical anisotropy of shale reservoirs at different depths

A Statistical Anisotropic Damage Constitutive Model for Shale Including the Effects of Confining Pressure and Strain Rate

The Statistical Damage Constitutive Model of Longmaxi Shale under High Temperature and High Pressure

Thermo-mechanical characterization of shale using nanoindentation

Simulation of thermal cracking in anisotropic shale formations using the combined finite-discrete element method

Dynamic mechanical properties and constitutive model of shale with different bedding under triaxial impact test

Investigating fracture initiation and propagation in deep buried shale due to thermal shock: a numerical approach

Dynamic Mechanical Behavior and Damage Constitutive Model of Shales with Different Bedding under Compressive Impact Loading

Changes in Thermophysical and Thermomechanical Properties of Thermally Treated Anisotropic Shale after Water Cooling

Permeability, deformation characteristics, and damage constitutive model of shale under triaxial hydromechanical coupling

Experimental Study on the Anisotropic Mechanical Properties of Oil Shales under Real-Time High-Temperature Conditions

Experimental and numerical investigation on the fracture behavior of deep anisotropic shale reservoir under in-situ temperature

Anisotropic properties of shale and its impact on underground structures: an experimental and numerical simulation

Mechanical Behaviors of an Anisotropic Shale Rock