Abstract:In this study, we propose, fabricate, and examine the electrical characteristics of high-performance channel-engineered amorphous aluminum-doped zinc tin oxide (a-AZTO) thin-film transistors (TFTs). Amorphous indium gallium zinc oxide (a-IGZO) film with improved conductivity (obtained via rapid thermal annealing in vacuum) is applied as the local conductive buried layer (LCBL) of the channel-engineered a-AZTO TFTs. The optical transmittance of the a-IGZO and a-AZTO films in the visible region is >85%. The a-IGZO LCBL reduces the resistance of the a-AZTO channel, thereby resulting in increased drain current and improved device performance. We find that our fabricated channel-engineered a-AZTO TFTs with LCBLs are superior to non-channel-engineered a-AZTO TFTs without LCBLs in terms of electrical properties such as the threshold voltage, mobility, subthreshold swing, and on-off current ratios. In particular, as the a-IGZO LCBL length at the bottom of the channel increases, the channel resistance gradually decreases, eventually resulting in a mobility of 22.8 cm²/V · s, subthreshold swing of 470 mV/dec, and on-off current ratio of 3.98×107. We also investigate the effect of the a-IGZO LCBL on the operational reliability of a-AZTO TFTs by measuring the variation in the threshold voltage for positive gate bias temperature stress (PBTS), negative gate bias temperature stress (NBTS), and negative gate bias temperature illumination stress (NBTIS). The results indicate that the TFT instability for temperature and light is not affected by the LCBL. Therefore, our proposed channel-engineered a-AZTO TFT can form a promising high-performance high-reliability switching device for next-generation displays.

Improving the electrical performance of vertical thin-film transistor by engineering its back-channel interface

Improving the Performance of Aligned Carbon Nanotube-Based Transistors by Refreshing the Substrate Surface.

Effect of source–drain contact and channel length on the performance of vertical thin-film transistors

Improvement in Device Performance of Vertical Thin-Film Transistors Using Atomic Layer Deposited IGZO Channel and Polyimide Spacer

P‐17: Development of Vertical Oxide Channel Thin Film Transistor Based on Hard‐Mask Etching

Impact of Strategic Approaches for Improving the Device Performance of Mesa-shaped Nanoscale Vertical-Channel Thin-Film Transistors Using Atomic-Layer Deposited In–Ga–Zn–O Channel Layers

Comprehensive study of the impact of TSV induced thermo-mechanical stress on 3D IC device performance

Implementation of In–Ga–Zn–O Thin-Film Transistors with Vertical Channel Structures Designed with Atomic-Layer Deposition and Silicon Spacer Steps

High-Performance Back-Channel-Etched Thin-Film Transistors With Amorphous Si-Incorporated Sno2 Active Layer

High Performance Indium-Zinc-Oxide Thin-Film Transistors Fabricated with A Back-Channel-Etch-Technique

Impact of TSV Induced Thermo-Mechanical Stress on Semiconductor Device Performance

Geometrical and Structural Design Schemes for Trench-Shaped Vertical Channel Transistors Using Atomic-Layer Deposited In-Ga-Zn-O

Effect of gate dielectric scaling in nanometer scale vertical thin film transistors

Performance Enhancement of Channel-Engineered Al-Zn-Sn-O Thin-Film Transistors with Highly Conductive In-Ga-Zn-O Buried Layer via Vacuum Rapid Thermal Annealing

Impacts of Vertically Stacked Monolithic 3D-IC Process on Characteristics of Underlying Thin-Film Transistor

Flexible vertical-channel thin-film transistors using In-Ga-Zn-O active channel and polyimide spacer on poly(ethylene naphthalate) substrate

Improved Electrical Performance of an Oxide Thin-Film Transistor Having Multistacked Active Layers Using a Solution Process

Vertical Thin Film Transistor Based on Conductivity Modulation of Graphene Electrode by Micro‐Hole Patterning

Vertically Extended Channel Architecture for Implementing a Photolithographically Scalable Thin-Film Transistor