Abstract:Abstract High performance thin-film transistor (TFT) is essential for the next-generation display. Especially, scale-downed TFT becomes very important to develop high resolution display. The vertical-channel TFTs (V-TFTs) attracts lots of interests from the view point of minimizing pixel size because V-TFTs have very small footprint compared to the lateral TFT. V-TFTs provide the smallest pixel size without the limitation of channel length. [1] In addition, V-TFTs could show high strain stress stability due to the small channel size formed vertically when they are adapted in flexible display. Channel length of V-TFTs is controlled by the thickness of spacer placed between source and drain. Since the main purpose of adoption of V-TFTs is to increase the current driving ability, typical channel length of V-TFT is shorter than 1 um (~0.5 um). The length of channel in vertical TFT, however, should be adjustable according to the TFT applications. The major method to deposit spacer which determine the channel length (channel define layer) is vacuum process such as plasma-enhanced chemical vapor deposition (PECVD). Such vacuum process could provide high film performance, quality and good uniformity. Nonetheless, vacuum process has disadvantage in the deposition of spacer with thick thickness because of very long process time. In contrast, solution-process coating is easy and fast method. By controlling coating speed and time, solution process provides thick films uniformly. Furthermore, solution process can be applied using both of organic and inorganic materials. While inorganic materials result in films with low defects, the space processed with organic materials yields low stress, making this suitable for the flexible vertical TFTs. In this study, we fabricate vertical TFT with spacers deposited with various materials such as organic and inorganic by solution-process coating. We also investigate back-channel effect and TFT strain stress depending on the kinds of spacer materials. We select three different types of materials for the spacer; SiO 2 , PI, carbon based organic material. Solution-processed SiO 2 film have dielectric constant of 4.27 and similar film quality with PECVD SiO 2 . The solution-processed films show very low leakage current of 1.35x10 -9 A/cm -2 at 0.1MV/cm. Carbon based organic material also has low dielectric constant and is approximately 1um~3um thick. We studied the effect of back-channel according to various spacer materials. Instead of V-TFTs, top gate staggered TFTs were fabricated to mimic the structure of V-TFT because both TFTs have same process sequence. Figure 1(a) shows the schematic structure of top-gate TFT. The various buffer layers corresponding to the spacer in V-TFT were deposited by solution processes. The TFT with solution-processed film did not show degradation of electrical characteristics in comparison to that with PECVD SiO 2 . After confirming the feasibility of solution-processed spacer for the vertical TFT, three types of solution-processed layer are applied to actual vertical TFT as a spacer. The patterned source ITO electrode was coated with solution processed spacer, followed by the deposition of drain electrode. Drain and spacer were patterned with spacer mask. In sequence, active, gate insulator and gate are deposited and patterned at once. We will report the performance of V-TFTs with solution processed spacer in terms of mobility, stability, and thermal stability. Figure 1. (a) Schematic diagram of top-gate TFT, (b) Schematic structure of vertical TFT with solution processed spacer Acknowledgements This work was supported by 'The Cross-Ministry Giga KOREA Project' grant from the Ministry of Science, ICT and Future Planning, Korea [GK15D0100]. References [1]. Chi-Sun Hwang, Sang-Hee Ko Park, Himchan Oh, Min-Ki Ryu, and Sung-Min Yoon, IEEE ELECTRON DEVICE L, VOL. 35, NO. 3, p360-362, (2014) Figure 1

Vertically Extended Channel Architecture for Implementing a Photolithographically Scalable Thin-Film Transistor

Vertically Extended Channel Architecture for Implementing a Photolithographically Scalable Thin-Film Transistor

Vertical Oxide Channel Thin Film Transistor for Ultra-High-Resolution Display

Research Progress of Vertical Channel Thin Film Transistor Device.

Vertical Oxide Thin-Film Transistor with Solution-Processed Channel Define Layer

P‐17: Development of Vertical Oxide Channel Thin Film Transistor Based on Hard‐Mask Etching

Flexible All-organic, All-solution Processed Thin Film Transistor Array with Ultrashort Channel

1.1: Invited Paper: TFT Backplane for Display

A Short-Channel TFT of Amorphous In–Ga–Zn–O Semiconductor Pixel Structure With Advanced Five-Mask Process

Vertical field‐effect transistor using c‐axis aligned crystal indium–gallium–zinc oxide on glass substrate and prototype organic light‐emitting diode display

High-Density Integration of Ultrabright OLEDs on a Miniaturized Needle-Shaped CMOS Backplane

Implementation of oxide vertical channel TFTs with sub-150 nm channel length using atomic-layer deposited IGZO active and HfO2 gate insulator

Flexible small-channel thin-film transistors by electrohydrodynamic lithography

Vertically integrated, double stack oxide TFT layers for high‐resolution AMOLED backplane

High-Yield, Scaling-Up Fabrication of Fermi-Level-Pinning-Free Organic Thin-Film Transistor Arrays with Printed Van der Waals Contacts

Channel-Shortening Effect Suppression of a High-Mobility Self-Aligned Oxide TFT Using Trench Structure

27‐2: Novel LTPS‐TFT Backplane Structure on Glass for 1,443ppi 4.3‐in. AMOLED VR Display

Large-scale sub-5-nm vertical transistors by van der Waals integration

Highly Flexible Electronics from Scalable Vertical Thin Film Transistors

28‐1: Invited Paper: Effect of Channel Defining Layer on the Vertical Oxide TFTs for the Application to the Ultra High Resolution Display

Vertical full-colour micro-LEDs via 2D materials-based layer transfer