Abstract:This work fabricated a series of microstructures consisting of different equiaxed α (α eq ) and β phase contents to investigated the effect of phase content on mechanical properties and deformation mechanism, including slip initiation, slip transfer, stress-induced martensite (SIM) and crack nucleation of TC21 titanium alloy. The results show that, with the decrease of α eq phase content, the YS of the alloy firstly decreases and then increases, the UTS gradually increases, and the EL gradually decreases. The significant variation of mechanical properties is closely related to the deformation mechanism of microstructures with different α eq phase contents. In sample with high α eq phase content, α eq phase is deformed by slip prior to β phase, and with the increase of strain, β phase can coordinate deformation by slip initiation and exhibits a better ability to coordinate plastic deformation. In samples with medium α eq phase content, the stability of β phase decreases, slip in α eq grain and SIM in β grain can be initiated simultaneously. However, the formation of SIM would harden β phase, and with the increase of strain, it would restrain the ability of β phase to further coordinate plastic deformation. In samples with low α eq phase content, the stability of β phase decreases sharply, which could induce the precipitation of fine-lamellar secondary α (α s ) and acicular martensite α'' in β grain during annealing. These precipitated α s and α'' can not only inhibit the formation of SIM, but also dramatically reduce the ability of β phase to coordinate plastic deformation. Meanwhile, the evolution of deformation mechanism in different samples can significantly influence the crack nucleation location (slip band or α eq /β interface) during deformation. This paper analyzes in detail the effect of α eq phase content on mechanical properties of TC21 titanium alloy based on deformation mechanism, it would contribute to the establishment of a relationship among phase content, deformation mechanism and mechanical properties.

Deformation Behavior and Tensile Properties of the Semi-Equiaxed Microstructure in Near Alpha Titanium Alloy

Revealing interface-assisted plastic anisotropy <i>via in situ</i> transmission electron microscopy tension of lamellar TiAl

Effect of Content and Configuration of Equiaxed Α and Lamellar Α on Deformation Mechanism and Tensile Properties of a Near-Α Titanium Alloy

In-Situ Study on Tensile Deformation and Fracture Mechanisms of Metastable β Titanium Alloy with Equiaxed Microstructure

Microstructure Regulation and Strength-Elongation Synergy of the Near Alpha TZAM Alloy Via Thermomechanical Processing

Ex-situ study on mechanical properties and deformation mechanism of three typical microstructures in TA19 titanium alloy

In-Situ Tensile Deformation Behavior Of As-Built Laser Direct Metal Deposited Ti-6al-4v Alloy At 200 Degrees C

In-situ Investigation of the Anisotropic Mechanical Properties of Laser Direct Metal Deposition Ti6Al4V Alloy

Achieving Enhanced Tensile Strength-Ductility Synergy Through Phase Modulation in Additively Manufactured Titanium Alloys

In-situ Investigation Via High Energy X-ray Diffraction of Stress-Induced(0002)α→(110)β Transformation in a Ti-5.5Mo-7.2Al-4.5Zr-2.6Sn-2.1Cr Alloy

In Situ Electron Backscatter Diffraction Study of Deformation Inhomogeneity under Uniaxial Tension of Laser Melting Deposited TA15 Alloy

Study on the Relationship Between Microstructure and Mechanical Property in a Metastable Β Titanium Alloy

Enhanced strength of dual-phase Ti6242 alloy via a heterogeneous microstructure

Effect of phase content on mechanical properties and deformation mechanism in TC21 titanium alloy: An in-situ tensile investigation

Deformation Mechanisms in a Β-Quenched Ti-5321 Alloy: In-situ Investigation Related to Slip Activity, Orientation Evolution and Stress Induced Martensite

Effect of Size of Alpha Phases on Cyclic Deformation and Fatigue Crack Initiation During Fatigue of an Alpha-Beta Titanium Alloy

The Effect of Precursory Α and Ω Phase on Microstructure Evolution and Tensile Properties of Metastable Β Titanium Alloy

Tensile Brittleness and Ductility Improvement in a Novel Metastable Β Titanium Alloy with Lamella Structure

Quantification of α phase strengthening in titanium alloys: Crystal plasticity model incorporating α/β heterointerfaces

Formation mechanism of lamellar bimodal microstructure and mechanical property in the high temperature near α titanium alloy

The Α Phase Recrystallization Mechanism and Mechanical Properties of a Near-Α Titanium Matrix Composite