Synthesis and Mechanism of High Structural Stability of Nickel-Rich Cathode Materials by Adjusting Li-Excess

Zhenlu Yu,Xingyu Qu,Tao Wan,Aichun Dou,Yu Zhou,Xiaoqi Peng,Mingru Su,Yunjian Liu,Dewei Chu
DOI: https://doi.org/10.1021/acsami.0c12541
2020-08-14
Abstract:It has been a long-term challenge to improve the phase stability of Ni-rich LiNi<i><sub>x</sub></i>Mn<i><sub>y</sub></i>Co<sub>1–<i>x</i>–<i>y</i></sub>O<sub>2</sub> (<i>x</i> ≥ 0.6) transition metal (TM) oxides for large-scale applications. Herein, a new structure engineering strategy is utilized to optimize the structural arrangement of Li<sub>1+<i>x</i></sub>(Ni<sub>0.88</sub>Mn<sub>0.06</sub>Co<sub>0.06</sub>)<sub>1–<i>x</i></sub>O<sub>2</sub> (NMC88) with a different Li-excess content. It was found that structure stability and particle sizes can be tuned with suitable Li-excess contents. NMC88 with an actual Li-excess of 2.7% (<i>x</i> = 0.027, Li/TM = 1.055) exhibits a high discharge capacity (209.1 mAh g<sup>–1</sup> at 3.0–4.3 V, 0.1 C) and maintains 91.7% after the 100th cycle at 1 C compared with the NMC88 sample free of Li-excess. It also performs a delayed voltage decay and a good rate capacity, delivering 145.8 mAh g<sup>–1</sup> at a high rate of 10 C. Multiscale characterization technologies including ex/in situ X-ray diffraction (XRD), focused ion beam (FIB) cutting-scanning electronic microscopy (SEM), and transmission electron microscopy (TEM) results show that a proper Li-excess (2.7%) content contributes to the formation of a broader Li slab, optimized cation mixing ratio, and even particle sizes. Therefore, NMC88 with a proper Li-excess is a good choice for next-generation cathode materials.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c12541?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c12541</a>.Detailed crystalline structural information of E00, E03, E06, E09, and E12 after refinement (Table S1); actual ratio of cations in different samples measured by ICP-AES (Table S2); detailed graphic Rietveld refinement results for E00, E03, E06, E09, and E12 (Figure S1); cyclic voltammetry profiles of E00, E03, E06, E09, and E12 (Figure S2); Nyquist plot of E00, E03, E06, E09, and E12 at a discharged state of 3.0 V upon cycling (Figure S3); detailed fitting resistance values of E00, E03, E06, E09, and E12 after different cycles at 1 C using the Zview program (Table S3); GITT profiles of E00, E03, E09, and E12 (Figure S4); and captured SEM pictures of FIB-prepared E03 and E09 after 100 cycles at 1 C (Figure S5) (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c12541/suppl_file/am0c12541_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.
materials science, multidisciplinary,nanoscience & nanotechnology
What problem does this paper attempt to address?
The paper aims to address the phase stability issues encountered in large-scale applications of nickel-based lithium-rich ion battery cathode materials. Specifically, the study optimizes the structural stability of Li<sub>1+x</sub>(Ni<sub>0.88</sub>Mn<sub>0.06</sub>Co<sub>0.06</sub>)<sub>1-x</sub>O<sub>2</sub> (NMC88) materials by adjusting the lithium excess (Li-excess) content. The research finds that appropriate lithium excess can improve the structural stability and particle size of the material, and it exhibits excellent cycling stability and rate performance in terms of electrochemical properties. The main objectives include: 1. Optimizing the structural arrangement of the material by adjusting the lithium excess content. 2. Investigating the impact of different lithium excess contents on the structural stability of the material. 3. Exploring the specific effects of lithium excess on the electrochemical performance of the material.