Abstract:The local heat transfers of a thermally developing region in a rectangular channel filled with porous metal foam are investigated experimentally. A thin metal foil technique and thermal IR imaging are adopted for the measurement of the local temperature distribution. An open-cell metal foam made from copper having a porosity of 0.96 is used. The pore density of the foam is 30 PPI (pores per inch). Fluid flow characteristics like permeability and foam drag coefficient are measured by conducting local pressure drop experiments. Additionally, by utilizing local pressure measurement data, the non-dimensional pressure coefficient is quantified. The non-dimensional pressure coefficient increases in the streamwise direction, irrespective of the Reynolds number, and remains almost constant in the spanwise direction for Reynolds numbers greater than 2000. The effect of the metal foam thickness on local heat transfer and pressure drop is investigated for 13 and 20 mm thick porous metal foam. It is compared with a smooth channel to quantify the heat transfer augmentation in a channel filled with metal foam. Compared to a smooth channel, the channel with 20 mm thick metal foam shows 14 to 25 times augmentation in the Nusselt number. Similarly, the channel with 13 mm foam shows 10 to 15 times augmentation in Nusselt number. The increasing trend of the local Nusselt number is observed in a streamwise direction. The different criteria are studied to understand the thermal performance evaluation. In the Constant Pumping Power Criterion (CPPC), enhancements ranged from 3.14 to 6.72 for a 20 mm thickness and 2.62 and 4.34 for a 13 mm foam thickness. Similarly, in the Performance Evaluation Criterion (PEC), enhancement ranges from 2.23 to 4.83 for a 20 mm foam thickness and 1.89 to 3.16 for a 13 mm foam thickness. A generalized correlation is suggested to describe the average Nusselt number considering the foam material, foam thickness, pore density, and porosity as parameters.

Investigation of Kelvin-like solid foams for potential engineering applications: An attractive set of geometrical and thermo-hydraulic properties

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Modelling and Numerical Simulation of Fluid Flow and Heat Transfer through Open Celled Metal Foam

Numerical and experimental study of open-cell foams for the characterization of heat exchangers

Review and a Theoretical Approach on Pressure Drop Correlations of Flow through Open-Cell Metal Foam

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Characterization of rigid open-cell foams using direct ultrasonic simulation

Local heat transfer distribution of thermally developing region in a rectangular open-cell metal foamed channel

An experimental toolbox for the physical characterization of thermal insulating polymeric foams

Design and Analysis of Three-Dimensional Foams: A Review

Novel Mixing Relations for Determining the Effective Thermal Conductivity of Open-Cell Foams

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

An Object-Oriented Library for Heat Transfer Modelling and Simulation in Open Cell Foams

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Forced Convection Heat Transfer: A Comparison Between Open-Cell Metal Foams and Additive Manufactured Kelvin Cells

Three-dimensional modeling of the mechanical property of linearly elastic open cell foams

Analyzing the performance impact on metallic foams: a comprehensive overview

Preparation, Characterization, and Mechanical Properties of Microcellular Poly(Aryl Ether Ketone) Foams