Abstract:Methods and results of the experimental and numerical investigation of the 1D heat transfer properties of a multifunctional syntactic foam. Top: experimental setup with schematic representation of the position of the thermocouples and boundary conditions; bottom left: microstructure of a representative sample of epoxy/hollow glass microspheres (HGM)/phase change material (PCM) syntactic foam; bottom right: temperature as a function of time in the heating experiment for the thermocouple located at 13 mm from the hot surface for different foam compositions. Data from the experiments (dotted line) and from the numerical modeling (solid line). Syntactic foams are lightweight porous composites obtained by the addition of hollow glass microspheres (HGMs) to a polymer matrix. This work experimentally and numerically investigates the thermal behavior of epoxy‐based syntactic foams with enhanced multifunctionality produced by incorporating microencapsulated phase change materials (PCMs) as functional fillers, providing thermal energy storage and temperature stabilization due to its large latent heat of melting. Foams are fabricated using varying ratios of HGMs (0–40 vol%) and PCM (0–40 vol%) to achieve tuned densities and thermal properties with a total filler content of up to 40 vol%. A one‐dimensional numerical heat transfer model based on the enthalpy method is presented to simulate the thermal behavior of these materials. The model accurately incorporates the specific heat and thermal conductivity of the foam components, as well as the latent heat absorption during PCM melting (up to 68 J/g). The model is experimentally validated by demonstrating good agreement with the measurements of transient temperature profiles during heating tests on the foam samples. The validated tool is then leveraged to model the thermal response of the foams under a sinusoidally varying heat source, similar to the possible real applicative scenarios. These results can help optimize foam compositions balancing energy storage density, heat transfer properties, and structural support for lightweight energy storage systems. Potential applications include high‐efficiency thermal management in battery packs, electronic cooling, solar energy storage, and sustainable temperature‐controlled buildings. Highlights Foams with 0–40 vol% PCM and 0–40 vol% HGM show up to 68 J/g latent heat. 1D numerical model accurately captures thermal conductivity and PCM phase change. Validated model simulates thermal response under sinusoidal heat, optimizing foam composition. Foams act as thermal reservoirs, maintaining up to 5°C lower surface temperatures than epoxy.

Novel Mixing Relations for Determining the Effective Thermal Conductivity of Open-Cell Foams

Modeling and Prediction of the Effective Thermal Conductivity of Random Open-Cell Porous Foams

Estimation of effective thermal conductivity in open-cell foam with hierarchical pore structure using lattice Boltzmann method

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Investigation of Kelvin-like solid foams for potential engineering applications: An attractive set of geometrical and thermo-hydraulic properties

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Improved body-centered cubic unit for accurately predicting the melting characteristics of metal foam composite phase change material

Numerical and experimental study of open-cell foams for the characterization of heat exchangers

Characterization of rigid open-cell foams using direct ultrasonic simulation

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

Introducing a novel method for determining the effective thermal conductivity at moderate and high Péclet numbers

Machine learning backpropagation network analysis of permeability, Forchheimer coefficient, and effective thermal conductivity of macroporous foam–fluid systems

Complementary Mass Transport Investigations in Open-Cell Foams: Full-Field Computational Fluid Dynamics Simulation with Random-Walk Microscopic Particle Tracking and Methane Nuclear Magnetic Resonance Displacement Measurements

Heat Transfer Analysis for Open Cell Metallic Foams

An experimental toolbox for the physical characterization of thermal insulating polymeric foams

Isotropic and anisotropic heat transfer in active wall porous media foam type

Wrong expectation of superinsulation behavior from largely-expanded nanocellular foams

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Modeling the thermal behavior of multifunctional syntactic foams containing phase change materials for heat management applications