Abstract:Fundamental understanding of turbulent flow and heat transfer in composite porous-fluid systems, which consists of a fluid-saturated stochastic open-cell metal foam and a flow passing over it, is crucial for fostering technological development in numerous applications such as transpiration cooling in aerospace, packed-bed thermal storage and thermal management of electronic devices. In this work, conjugate heat transfer simulations were adopted to explore the turbulent flow and heat transfer features in a composite porous-fluid system at the pore scale. Simulations were performed to account for the influence of the blockage ratios (i.e., BR = 0.5, 0.8 and 1.0) on pressure drop and heat transfer rate by introducing a new concept called penetration cooling length. Furthermore, the effect of Reynolds numbers (i.e., Re = 1800, 3600 and 7200) at different blockage ratios was investigated in terms of pressure drop, fluid and solid temperatures, interstitial heat transfer coefficient, and flow leakage. Results indicate that for a fixed blockage ratio, as the Reynolds number increases by a factor of 3.0, there is a 14.9-fold increase in the pressure drop and a 2.9-fold increase in the interstitial heat transfer coefficient. Additionally, for a fixed Reynolds number, when the blockage ratio increases by a factor of 2.0, there is a 6.8-fold increase in the pressure drop and a 1.8-fold increase in the interstitial heat transfer coefficient. Flow visualization indicated that the penetration cooling length is influenced by flow leakage from the porous-fluid interface. Results show at small blockage ratios and low Reynolds numbers, a significant portion of the flow from the porous region leaves it to the clear region on top of the porous block. While, at high Reynolds numbers and large blockage ratios, the flow leakage is reduced. Additionally, for a low blockage ratio ( BR < 0.5), the amount of flow leakage depends on the Reynolds number, while it is independent of the Reynolds number for BR > 0.8. Finally, this study introduces a novel correlation for the interstitial heat transfer coefficient derived from conjugate heat transfer pore-scale simulations. The correlation is established on the basis of Reynolds number, blockage ratio, and development length of the metal foam, offering valuable insights into heat transfer phenomena in porous media.

Isotropic and anisotropic heat transfer in active wall porous media foam type

Consideration of Heat Transfer Enhancement Mechanism Using Nano- and Micro-Scale Porous Layer

Comparison of convective heat transfer in metal foam-filled channels of three different cross-sections

Contribution of the radiative transfer mechanism to the total thermal conductivity of anisotropic porous materials

Steady and unsteady numerical investigation of mixed convective heat transfer enhancement in a channel with baffles attached to the heated wall

Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Wall Heat Transfer Characteristic of Parallel-plate Channel Filled with Open-cell Metal Foams in Large Flow Velocity Range

Variable Permeability Effects on Natural Convection in a Vertical Porous Layer with Uniform Heat Flux from the Side

Optimizing heat transfer within a rectangular channel through intermittent metal foam block configurations: A numerical study

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Experimental Analysis of Natural Convection and Flow Visualization in an Asymmetrically Heated Open Vertical Channel

Study of the Thermal and Hydraulic Performance of Porous Block versus Gyroid Structure: Experimental and Numerical Approaches

Non-Intrusive Heat Transfer Coefficient Determination in Highly Porous Metal/Ceramic Foams

Numerical simulation of heat transfer performance in an enclosure filled with a metal foam and nano-enhanced phase change material

Numerical and experimental study of open-cell foams for the characterization of heat exchangers

Numerical study and experimental validation of heat transfer in a CenoPCM reinforced multi-layered meta-material wall for energy efficient buildings

Impact of heat transfer in a duct composed of anisotropic porous material: A non-linear Brinkman-Forchheimer extended Darcy's model: A computational study

Experimental and numerical study of mixed convection heat transfer in a vented cavity partially filled with a porous medium: Effects of reynolds and rayleigh numbers on Nusselt number and flow regimes

Numerical Simulation of Heat, Air, and Moisture Transfer Through a Wall of Porous Media

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam