Abstract:This article introduces an innovative approach to the investigation of the conductive-radiative heat transfer mechanism in expanded polystyrene (EPS) thermal insulation at negligible convection. Closed-cell EPS foam (bulk density 14-17 kg·m-3) in the form of panels (of thickness 0.02-0.18 m) was tested with 1-15 µm graphite microparticles (GMP) at two different industrial concentrations (up to 4.3% of the EPS mass). A heat flow meter (HFM) was found to be precise enough to observe all thermal effects under study: the dependence of the total thermal conductivity on thickness, density, and GMP content, as well as the thermal resistance relative gain. An alternative explanation of the total thermal conductivity "thickness effect" is proposed. The conductive-radiative components of the total thermal conductivity were separated, by comparing measured (with and without Al-foil) and simulated (i.e., calculated based on data reported in the literature) results. This helps to elucidate why a small addition of GMP (below 4.3%) forces such an evident drop in total thermal conductivity, down to 0.03 W·m-1·K-1. As proposed, a physical cause is related to the change in mechanism of the heat transfer by conduction and radiation. The main accomplishment is discovering that the change forced by GMP in the polymer matrix thermal conduction may dominate the radiation change. Hence, the matrix conduction component change is considered to be the major cause of the observed drop in total thermal conductivity of EPS insulation. At the microscopic level of the molecules or chains (e.g., in polymers), significant differences observed in the intensity of Raman spectra and in the glass transition temperature increase on differential scanning calorimetry(DSC) thermograms, when comparing EPS foam with and without GMP, complementarily support the above statement. An additional practical achievement is finding the maximum thickness at which one may reduce the "grey" EPS insulating layer, with respect to "dotted" EPS at a required level of thermal resistance. In the case of the thickest (0.30 m) panels for a passive building, above 18% of thickness reduction is found to be possible.

Contribution of the radiative transfer mechanism to the total thermal conductivity of anisotropic porous materials

Anisotropic Porous Ceramic Material with Hierarchical Architecture for Thermal Insulation

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Isotropic and anisotropic heat transfer in active wall porous media foam type

Modeling of Influence of Gas Atmosphere and Pore-Size Distribution on the Effective Thermal Conductivity of Knudsen and Non-Knudsen Porous Materials

The thermal conductivity properties of porous materials based on TPMS

Thermal Anisotropy Enhanced by Phonon Size Effects in Nanoporous Materials

An efficient computational method for anisotropic thermal conductivity estimation

3-Dimensional Anisotropic Thermal Transport in Microscale Poly(3-Hexylthiophene) Thin Films

Change in Conductive-Radiative Heat Transfer Mechanism Forced by Graphite Microfiller in Expanded Polystyrene Thermal Insulation-Experimental and Simulated Investigations

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Introducing a novel method for determining the effective thermal conductivity at moderate and high Péclet numbers

Numerical study on heat transfer performance of printed circuit heat exchanger with anisotropic thermal conductivity

Thermal conductivity of micro/nano-porous polymers: Prediction models and applications

Temperature-dependent thermal conductivity in nanoporous materials studied by the Boltzmann Transport Equation

Experimental Thermal Conductivity Measurement of Hollow-Structured Polypropylene Material by DTC-25 and Hot Box Test

Tunable anisotropic thermal transport in porous carbon foams: The role of phonon coupling

Thermal Transport Properties of Nanoporous Silicon with Significant Specific Surface Area

On The Thermal Conductivity of Conjugated Polymers for Thermoelectrics

Porous polypropylene produced by phase separation for high solar reflectivity and passive cooling

Study of the Thermophysical Properties of Promising Thermal Insulation Materials for Space Engineering