Abstract:Fundamental understanding of turbulent flow and heat transfer in composite porous-fluid systems, which consists of a fluid-saturated stochastic open-cell metal foam and a flow passing over it, is crucial for fostering technological development in numerous applications such as transpiration cooling in aerospace, packed-bed thermal storage and thermal management of electronic devices. In this work, conjugate heat transfer simulations were adopted to explore the turbulent flow and heat transfer features in a composite porous-fluid system at the pore scale. Simulations were performed to account for the influence of the blockage ratios (i.e., BR = 0.5, 0.8 and 1.0) on pressure drop and heat transfer rate by introducing a new concept called penetration cooling length. Furthermore, the effect of Reynolds numbers (i.e., Re = 1800, 3600 and 7200) at different blockage ratios was investigated in terms of pressure drop, fluid and solid temperatures, interstitial heat transfer coefficient, and flow leakage. Results indicate that for a fixed blockage ratio, as the Reynolds number increases by a factor of 3.0, there is a 14.9-fold increase in the pressure drop and a 2.9-fold increase in the interstitial heat transfer coefficient. Additionally, for a fixed Reynolds number, when the blockage ratio increases by a factor of 2.0, there is a 6.8-fold increase in the pressure drop and a 1.8-fold increase in the interstitial heat transfer coefficient. Flow visualization indicated that the penetration cooling length is influenced by flow leakage from the porous-fluid interface. Results show at small blockage ratios and low Reynolds numbers, a significant portion of the flow from the porous region leaves it to the clear region on top of the porous block. While, at high Reynolds numbers and large blockage ratios, the flow leakage is reduced. Additionally, for a low blockage ratio ( BR < 0.5), the amount of flow leakage depends on the Reynolds number, while it is independent of the Reynolds number for BR > 0.8. Finally, this study introduces a novel correlation for the interstitial heat transfer coefficient derived from conjugate heat transfer pore-scale simulations. The correlation is established on the basis of Reynolds number, blockage ratio, and development length of the metal foam, offering valuable insights into heat transfer phenomena in porous media.

Estimation of effective thermal conductivity in open-cell foam with hierarchical pore structure using lattice Boltzmann method

Modeling and Prediction of the Effective Thermal Conductivity of Random Open-Cell Porous Foams

Numerical study on the effective thermal conductivity and thermal tortuosity of porous media with different morphologies

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Numerical and experimental characterization of high-temperature heat transfer in a ceramic foam with dual-scale porosity

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Pore-scale computational analyses of non-Darcy flow through highly porous structures with various degrees of geometrical complexity

Thermal conductivity of closed-cell aluminum foam based on the 3D geometrical reconstruction

Novel Mixing Relations for Determining the Effective Thermal Conductivity of Open-Cell Foams

Forced Convection Heat Transfer in Porous Structure: Effect of Morphology on Pressure Drop and Heat Transfer Coefficient

High temperature and mesostructure effect on aluminum foam compression responses

Comparison of forced convective heat transfer between pillar and real foam structure under high Reynolds number

Topological design of open-cell microstructure with optimal effective thermal conductivity

Experimental investigation of permeability and Darcy-Forchheimer flow transition in metal foam with high pore density

A Novel Method to Determine Effective Thermal Conductivity of Porous Materials

Pore-scale numerical investigation on comprehensive heat transfer performance of homogeneous and graded metal foam heat sinks based on tetrakaidecahedron cell

Effects of structure characteristics and fluid on the effective thermal conductivity of sintered copper foam

Pore-scale conjugate heat transfer analysis of turbulent flow over stochastic open-cell metal foams

Machine learning backpropagation network analysis of permeability, Forchheimer coefficient, and effective thermal conductivity of macroporous foam–fluid systems

A New Approach for Open-Cell Foam Topology Generation: A Case Study Involving Transpiration Cooling

Three-dimensional effect on the effective thermal conductivity of porous media