Abstract:The local heat transfers of a thermally developing region in a rectangular channel filled with porous metal foam are investigated experimentally. A thin metal foil technique and thermal IR imaging are adopted for the measurement of the local temperature distribution. An open-cell metal foam made from copper having a porosity of 0.96 is used. The pore density of the foam is 30 PPI (pores per inch). Fluid flow characteristics like permeability and foam drag coefficient are measured by conducting local pressure drop experiments. Additionally, by utilizing local pressure measurement data, the non-dimensional pressure coefficient is quantified. The non-dimensional pressure coefficient increases in the streamwise direction, irrespective of the Reynolds number, and remains almost constant in the spanwise direction for Reynolds numbers greater than 2000. The effect of the metal foam thickness on local heat transfer and pressure drop is investigated for 13 and 20 mm thick porous metal foam. It is compared with a smooth channel to quantify the heat transfer augmentation in a channel filled with metal foam. Compared to a smooth channel, the channel with 20 mm thick metal foam shows 14 to 25 times augmentation in the Nusselt number. Similarly, the channel with 13 mm foam shows 10 to 15 times augmentation in Nusselt number. The increasing trend of the local Nusselt number is observed in a streamwise direction. The different criteria are studied to understand the thermal performance evaluation. In the Constant Pumping Power Criterion (CPPC), enhancements ranged from 3.14 to 6.72 for a 20 mm thickness and 2.62 and 4.34 for a 13 mm foam thickness. Similarly, in the Performance Evaluation Criterion (PEC), enhancement ranges from 2.23 to 4.83 for a 20 mm foam thickness and 1.89 to 3.16 for a 13 mm foam thickness. A generalized correlation is suggested to describe the average Nusselt number considering the foam material, foam thickness, pore density, and porosity as parameters.

Analyzing the performance impact on metallic foams: a comprehensive overview

Air-side Performance of Open-Cell Metal Foams for Use in Dehumidifying Heat Exchangers

Insight into classifications and manufacturing processes of metallic foams: A review

A Comparison of Metal-Foam Heat Exchangers to Compact Multilouver Designs for Air-Side Heat Transfer Applications

Modelling and Numerical Simulation of Fluid Flow and Heat Transfer through Open Celled Metal Foam

Heat Transfer Analysis for Open Cell Metallic Foams

A Review of Metal Foam and Metal Matrix Composites for Heat Exchangers and Heat Sinks

Current and emerging methods for manufacturing of closed pore metal foams and its characteristics: a review

Unlocking the Thermal Efficiency of Irregular Open-Cell Metal Foams: A Computational Exploration of Flow Dynamics and Heat Transfer Phenomena

Metallic foam with cross flow heat exchanger: A review of parameters, performance, and challenges

Microstructure and Mechanical Properties of Metal Foams Fabricated via Melt Foaming and Powder Metallurgy Technique: A Review

A Review of Different Manufacturing Methods of Metallic Foams

Fabrication, properties, and applications of open-cell aluminum foams: A review

Experimental investigation of metal foam embedded surface thermal characteristics using air-jet impingement with different orifice geometry

Local heat transfer distribution of thermally developing region in a rectangular open-cell metal foamed channel

Numerical Simulations of Fluid Flow and Heat Transfer through Aluminum and Copper Metal Foam Heat Exchanger – A Comparative Study

Optimizing thermal performance in tube-in-tube heat exchangers with metal foam inserts: experimental and RSM analysis

Pore-scale Simulation of Forced Convection Heat Transfer under Turbulent Conditions in Open-Cell Metal Foam

Influence of thickness of metal foam on the conduction and convection heat transfer for a flat plate with metal foam impinged by a single circular air jet

Influence of Foam Morphology on Flow and Heat Transport in a Random Packed Bed with Metallic Foam Pellets-An Investigation Using CFD

Numerical analysis of the heat transfer enhancement by using metal foam