Abstract:For about 100 years, potentiometry with ion-selective electrodes has been one of the dominating electroanalytical techniques. While great advances in terms of selective chemistries and materials have been achieved in recent years, the basic manner in which ion-selective membranes are used has not fundamentally changed. The potential readings are directly co-dependent on the potential at the reference electrode, which requires maintenance and for which very few accepted alternatives have been proposed. Fouling or clogging of the exposed electrode surfaces will lead to changes in the observed potential. At the same time, the Nernst equation predicts quite small potential changes, on the order of millivolts for concentration changes on the order of a factor two, making frequent recalibration, accurate temperature control and electrode maintenance key requirements of routine analytical measurements. While the relatively advanced selective materials developed for ion-selective sensors would be highly attractive for low power remote sensing application, one should consider solutions beyond classical potentiometry to make this technology practically feasible. This paper evaluates some recent examples that may be attractive solutions to the stated problems that face potentiometric measurements. These include high-amplitude sensing approaches, with sensitivities that are an order of magnitude larger than predicted by the Nernst equation; backside calibration potentiometry, where knowledge of the magnitude of the potential is irrelevant and the system is evaluated from the backside of the membrane; controlled current coulometry with ion-selective membranes, an attractive technique for calibration-free reagent delivery without the need for standards or volumetry; localized electrochemical titrations at ion-selective membranes, making it possible to design sensors that directly monitor parameters such as total acidity for which volumetric techniques were traditionally used; and controlled potential coulometry, where all ions of interest are selectively transferred into the ion-selective organic phase, forming a calibration-free technique that would be exquisitely suitable for remote sensing applications.

Improvement of the Upper Detection Limit of Ionophore-Based H + -Selective Electrodes: Explanation and Elimination of Apparently Super-Nernstian Responses

Improving the Detection Limit of Anion-Selective Electrodes: an Iodide-Selective Membrane with a Nanomolar Detection Limit.

Electrochemically Imaging the Response of Ion-Selective Membranes with an Ultralow Detection Limit.

Evaluation of the Separate Equilibrium Processes That Dictate the Upper Detection Limit of Neutral Ionophore-Based Potentiometric Sensors.

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

Beyond potentiometry: robust electrochemical ion sensor concepts in view of remote chemical sensing

Determining detection limits of aqueous anions using electrochemical impedance spectroscopy

Ion-Selective Detection of Cations and Anions by Using Pulsed Amperometric Two-Electrode System

Optimization of Electrolytes with Redox Reagents to Improve the Impedimetric Signal for Use with a Low-Cost Analyzer

Amperometric Response of Solid-Contact Ion-Selective Electrodes Utilizing a Two-Compartment Cell and a Redox Couple in Solution

Improved Sensitivity and Selectivity for the Redox Potentiometric Measurement of Biological Redox Molecules Using Nafion-Coated Platinum Decorated Nanoporous Gold Electrodes

Covalently Attached Ionophores to Extend the Working Range of Potentiometric pH Sensors with Poly(decyl methacrylate) Sensing Membranes

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

Exploiting the pH-Cross Sensitivity of Ion-Selective Optodes to Broaden Their Response Range

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold I: PN-heterocycles and Urea Based Cleft Ionophores for Hydrosulfide/hydrosulfate Selective Electrodes

A Simple Heterogenous Precipitate Based Sodium ion Selective Electrode- Its Preparation and Analytical Application

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

Competing surface reactions limiting the performance of ion-sensitive field-effect transistors

Improved Lead Sensing Using a Solid-Contact Ion-Selective Electrode with Polymeric Membrane Modified with Carbon Nanofibers and Ionic Liquid Nanocomposite

Highly Selective Potentiometric Sensing of Biologically Relevant Pyrophosphate and Lysophosphatidic Acid Using N-Alkyl/Aryl Ammonium Resorcinarenes/Extended-Resorcinarenes As Ionophores