Abstract:Ion-selective electrodes (ISE’s) have benefits for solution-phase detection and quantification of ions, such as ease of operation, low cost, and high throughput compared to, e.g., ion chromatography or mass spectrometry methods. ISE devices are traditionally operated under zero-current conditions, where analyte ions passively exchange across a selective membrane barrier, yielding a Nernstian response after equilibration of Coulombic and chemical driving forces across the membrane. However, this passive mode of operation can require long equilibration times and lead to drift, for example due to electrolyte leakage and pH impacting the membrane and reference electrode. In recent years, non-equilibrium detection techniques have been of growing interest, where the ISE signal is obtained under applied electrical signal. However, the majority of this work has been devoted to cation sensing, with relatively few studies examining anion ISEs under active electrical actuation. Agricultural expansion and the corresponding uptick in application of supplemental nitrogen to soil has led to an increased demand for technologies to measure anions like nitrate – both from a production and regulation standpoint. In this work, we employ galvanostatic polarization of solid-contact ISEs as a non-equilibrium nitrate detection method. Our investigation involves coating electrodes with a redox-active charged polymer to act as a transduction layer to convert ionic to electronic signal, followed by solvent casting of a polymeric ion-selective membrane. We examine the impact of repeated rapid charging and discharging ISE electrode stacks on measurement time and stability. We compare the metrics derived from this technique to conventional open-circuit measurements using the same device. We identify benefits for this mode of operation using established nitrate membrane materials (e.g. nitrate ionophore VI membrane cocktail) that address some of the typical limitations of these conventional materials and we discuss opportunities for further refinement.

Improving the Detection Limit of Anion-Selective Electrodes: an Iodide-Selective Membrane with a Nanomolar Detection Limit.

Chitosan/Colloid Au Modified Gold Film Microelectrode For Iodide Determination

Improvement of the Upper Detection Limit of Ionophore-Based H + -Selective Electrodes: Explanation and Elimination of Apparently Super-Nernstian Responses

In Situ Growth of Ultrasmall Nanochannels in Porous Anodized Aluminum Membrane and Applied in Detection of Lead Ion.

Electrochemically Imaging the Response of Ion-Selective Membranes with an Ultralow Detection Limit.

Hydrogen Bond-Based Macrocyclic And Tripodal Neutral Ionophores For Highly Selective Polymeric Membrane Sulfate-Selective Electrodes

Nonequilibrium Anion Detection in Solid-Contact Ion-Selective Electrodes

A chalcohalide glass/alloy based Ag + ion - selective electrode with nanomolar detection limit

Characterization and Calibration of Sulphate ISE with Complex Membrane as Ionophore

Evaluation of the Separate Equilibrium Processes That Dictate the Upper Detection Limit of Neutral Ionophore-Based Potentiometric Sensors.

Protoporphyrin IX Based All-Solid-State Ion-Selective Electrodes for Choline Determination In Vitro

Selective anion sensing in high salt water via a remote indicator displacement assay

An All-Solid-State Ammonium Ion-Selective Electrode Based on Polyaniline As Transducer and Poly (O-Phenylenediamine) As Sensitive Membrane

Potentiometric Iodide Selectivity of Polymer‐Membrane Sensors Based on Co(II) Triazole Derivative

An All-Solid-State Silicate Ion-Selective Electrode Using PbSiO3 As a Sensitive Membrane

Deploying Hydrogen Bond Donor/acceptor on Arylethynyl Scaffold II: Urea Based Tripodal Ionophores for Polymeric Membrane Nitrate Selective Electrodes

Polymeric Membrane Electrodes Using Calix[4]pyrrole Bis/Tetra-Phosphonate Cavitands As Ionophores for Potentiometric Acetylcholine Sensing with High Selectivity.

Non-Equilibrium Nitrate Detection in Ionophore-Based Solid-Contact Ion-Selective Electrodes

Improved Lead Sensing Using a Solid-Contact Ion-Selective Electrode with Polymeric Membrane Modified with Carbon Nanofibers and Ionic Liquid Nanocomposite

Quantification of the concentration of ionic impurities in polymeric sensing membranes with the segmented sandwich technique.

Highly sensitive determination of iodide by ion chromatography with amperometric detection at a silver-based carbon paste electrode