Enhancement of hardness and high-temperature wear resistance of laser-clad CoAlTiWTa RHEA coating on inconel 718 superalloy by addition of TiC

Xiaolian Liu,Ke Zhu,Limin Zhong,Zhimin Zhang,Shixin Xu,Kun Li,Ke Feng,Ning Guo

DOI: https://doi.org/10.1007/s10853-024-10253-y

IF: 4.5

2024-09-28

Journal of Materials Science

Abstract:The particle-reinforced CoAlTiWTa refractory high-entropy alloy (RHEA) composite coatings with varying additions of TiC nanoparticles (0%, 2.5%, 5%, and 10% by mass) were deposited on the surface of Inconel 718 superalloy using continuous laser cladding. The phase composition and microstructural characteristics of the RHEA composite coatings were characterized by X-ray diffraction, energy-dispersive spectroscopy, and electron backscattering diffraction techniques. Microhardness distribution and tribological properties at 600 °C were systematically examined. The results show that as the TiC particle content in the coating increases, the hardness and wear resistance of the RHEA composite coating first gradually increase and then decrease significantly. The coating with 5% TiC exhibits the highest hardness and superior high-temperature friction and wear resistance due to laser-induced microstructural refinement and reduced carbide precipitation. When the TiC content reaches 10%, increased agglomeration of TiC particles and grain coarsening lead to a notable decline in hardness and high-temperature tribological performance. The addition of TiC alters the composition of the RHEA matrix, resulting in varying high-temperature friction and wear characteristics of the composite coatings.

materials science, multidisciplinary